Enerpac Specialty Hydraulic Jacks & Mobile Lifting Systems
Compare Enerpac specialty hydraulic jacks for industrial lifting, heavy-equipment maintenance, machinery positioning, field service, mining, construction and mobile load lifting. Explore Enerpac JH and JHA hydraulic jacks, GBJ industrial steel bottle jacks, POW’R-RISER® mobile lifting jacks and POW’R-LOCK™ self-locking mobile lift systems.
Northland Air Hydraulics supplies, services and supports Enerpac hydraulic lifting equipment from Edmonton, Alberta. Need help choosing a jack by capacity, minimum height, stroke, portability, load-holding requirement or job-site conditions? Send us the application and we can help narrow down the right lifting solution.
Different Jacks for Very Different Lifting Jobs
A compact bottle jack, an integrated hydraulic jack and a powered mobile lifting system may all lift heavy loads, but they are designed for very different applications. Capacity, starting height, stroke, mobility and load-holding requirements should all be considered before selecting the jack.
From Portable Bottle Jacks to 200-Ton Mobile Lift Systems
Enerpac specialty jacks cover everything from compact manually operated industrial bottle jacks to powered mobile systems designed for large mining, construction and heavy-equipment applications.
JH and JHA jacks combine the hydraulic cylinder and hand pump into one portable unit for lifting and positioning.
GBJ steel bottle jacks provide compact manual lifting capacities from 2 through 110 tons with multiple height and stroke options.
POW’R-RISER mobile jacks bring powered lifting to large equipment where portability around the job site matters.
POW’R-LOCK combines a 200-ton lifting system with continuous automatic mechanical load locking during lifting and lowering.
Compare Enerpac Industrial Jack Options
Open a product family below to compare models, capacities, stroke, applications, industries and important selection considerations.
Capacity is only one part of jack selection. Confirm the actual load, minimum jack height, required lifting stroke, maximum extension, available base area, operating orientation, support surface, mobility requirements and whether the load needs mechanical support after lifting.
JH / JHA
Enerpac Aluminum & Steel Hydraulic Jacks
Integrated Hand-Pump Jacks • Portable Industrial Lifting
JH / JHA Series — Integrated Hydraulic Jacks
Enerpac JH and JHA hydraulic jacks combine a hydraulic lifting cylinder and manually operated pump into one portable package. JHA models use lightweight aluminum construction while JH models use steel construction for rugged industrial lifting.
These jacks are useful when an operator needs a self-contained hydraulic jack without a separate external pump and hose. Northland can also help identify, service and cross-reference existing JH and JHA equipment.
Where JH & JHA Hydraulic Jacks May Be Used
JH and JHA hydraulic jacks may be used for machinery lifting, maintenance, equipment positioning, construction, fabrication, field repair and other applications where a compact self-contained hydraulic lifting tool is useful.
Applications for Enerpac JH & JHA Jacks
Integrated hydraulic jacks may support work in industrial maintenance, manufacturing, mining, construction, transportation, equipment repair and plant maintenance.
These are common examples and are not an exhaustive list. JH and JHA hydraulic jacks may also be suitable for other lifting and positioning applications where the jack capacity, height, stroke, orientation and support conditions are appropriate.
JH and JHA model availability can vary. Contact Northland with the existing model number, required capacity, stroke and minimum height so we can confirm availability, identify repair options or recommend a suitable current alternative.
Common JH / JHA Features
- Self-contained hydraulic jack with integrated hand pump.
- JHA aluminum construction reduces carrying weight.
- JH steel construction provides a rugged industrial jack platform.
- Internal relief protection helps protect against overload.
- Machined flat surfaces allow positioning in restricted areas.
- Chrome-plated plungers improve wear and corrosion resistance.
- Pumping handle is included with referenced models.
- JHA 7, 15 and 35-ton models are designed for all-direction operation.
| Construction | Capacity | Model | Stroke | Collapsed Height | Extended Height | Base W × L | Pump |
|---|---|---|---|---|---|---|---|
| Aluminum | 7 ton | JHA73 | 3.00" | 5.25" | 8.25" | 2.88 × 6.25" | Single-Speed |
| Aluminum | 15 ton | JHA156 | 6.06" | 9.75" | 15.81" | 3.63 × 9.38" | Single-Speed |
| Aluminum | 35 ton | JHA356 | 6.13" | 10.13" | 16.25" | 4.63 × 10.00" | Single-Speed |
| Steel | 30 ton | JH306 | 6.13" | 10.00" | 16.13" | 3.75 × 9.56" | Single-Speed |
| Steel | 50 ton | JH506 | 6.09" | 10.25" | 16.34" | 5.00 × 10.19" | 2-Speed |
| Steel | 100 ton | JH1006 | 6.06" | 11.31" | 17.37" | 7.13 × 12.94" | 2-Speed |
GBJ
Enerpac GBJ Industrial Steel Bottle Jacks
2–110 Ton • Manual Hydraulic Bottle Jacks
GBJ Series — Industrial Steel Hydraulic Bottle Jacks
Enerpac GBJ bottle jacks provide compact manual hydraulic lifting for industrial, maintenance, vehicle and equipment applications. The range covers capacities from 2 to 110 tons with standard, short and long-stroke configurations.
Selected models include a heat-treated adjustable extension screw with a cleated saddle to help close the starting-height gap and reduce slipping at the lifting point.
Where Enerpac Bottle Jacks May Be Used
GBJ industrial bottle jacks may be used for truck and fleet maintenance, machinery lifting, heavy-equipment repair, fabrication, field service, agricultural equipment, construction and general industrial maintenance.
Applications for Enerpac GBJ Bottle Jacks
Industrial steel bottle jacks may support automotive and fleet service, mining, agriculture, construction, manufacturing, maintenance shops and heavy-equipment service.
These are common examples and are not an exhaustive list. Enerpac GBJ bottle jacks may also be used for other industrial lifting applications where the load, stroke, minimum height, support surface and lifting point are suitable.
GBJ Series Features
- Lower handle effort helps reduce operator fatigue.
- Fully serviceable industrial jack design.
- High-strength beam and pump linkage for long service life.
- Pumping handle included on all current GBJ models.
- Safety relief valve helps protect against overload.
- Automatic bypass port helps prevent over-extension.
- Wiper seal helps protect internal components.
- Thick, large-area jack base improves strength and stability during lifting.
- Positioning handle is included on 22 through 55-ton models.
Place the bottle jack on a level, solid support capable of carrying the load across the entire jack base. Do not operate the jack on unstable or inadequately supported surfaces.
| Capacity | Model | Stroke | Screw Extension | Min. Height | Max. Height | Plunger Dia. | Saddle Dia. | Base W × L | Weight |
|---|---|---|---|---|---|---|---|---|---|
| 2 ton | GBJ002LA | 18.11" | — | 22.44" | 40.55" | 1.14" | — | 5.00 × 5.00" | 22.1 lb |
| 3 ton | GBJ003A | 4.13" | 2.56" | 6.61" | 13.31" | 0.94" | 0.93" | 2.95 × 4.57" | 8.1 lb |
| 5 ton | GBJ005A | 5.91" | 2.95" | 8.35" | 17.20" | 1.14" | 1.12" | 2.95 × 4.92" | 9.9 lb |
| 8 ton | GBJ008A | 5.91" | 2.95" | 8.62" | 17.48" | 1.46" | 1.50" | 3.54 × 5.67" | 13.6 lb |
| 11 ton | GBJ010A | 5.91" | 2.95" | 8.62" | 17.48" | 1.46" | 1.50" | 3.54 × 5.67" | 14.1 lb |
| 11 ton | GBJ010SA | 2.44" | 1.18" | 5.16" | 8.78" | 1.46" | 1.50" | 3.54 × 5.67" | 11.0 lb |
| 17 ton | GBJ015A | 5.91" | 2.95" | 8.98" | 17.83" | 1.75" | 1.77" | 4.41 × 6.42" | 19.4 lb |
| 22 ton | GBJ020A | 5.91" | 2.95" | 9.21" | 18.07" | 2.00" | 2.40" | 4.72 × 6.77" | 23.3 lb |
| 22 ton | GBJ020SA | 4.13" | 2.17" | 7.48" | 13.78" | 2.00" | 2.40" | 4.72 × 6.77" | 20.9 lb |
| 33 ton | GBJ030A | 5.91" | 2.95" | 9.53" | 18.39" | 2.27" | 2.72" | 5.67 × 7.72" | 34.2 lb |
| 55 ton | GBJ050A | 5.51" | — | 10.24" | 15.75" | 3.15" | 3.15" | 6.50 × 8.43" | 59.4 lb |
| 110 ton | GBJ100 | 5.91" | — | 11.81" | 17.72" | 4.33" | 3.70" | 11.65 × 13.11" | 191.8 lb |
PR
Enerpac POW’R-RISER® Mobile Lifting Jacks
60–200 Ton • Powered Mobile Heavy-Equipment Lifting
PR Series — POW’R-RISER® Mobile Lifting Jacks
Enerpac POW’R-RISER mobile lifting jacks are designed for large equipment where high capacity, portability and powered hydraulic operation are required. Rated capacities cover 60, 100, 150 and 200 tons with short- and long-stroke configurations.
The Enerpac PR-Series POW’R-RISER is not currently offered for sale in Canada. Contact Northland with your required capacity, stroke, minimum height and equipment application and we can help identify an appropriate lifting alternative.
Where POW’R-RISER Mobile Jacks Are Used
POW’R-RISER jacks are designed for heavy mobile equipment, large mining machinery, off-highway equipment, construction equipment and service work where the jack needs to move around the job site.
Applications for Enerpac POW’R-RISER
Mobile high-capacity lifting jacks may be used in mining, heavy construction, heavy equipment maintenance, fleet service, rail-related work and industrial field service.
These are common application examples and are not an exhaustive list. The correct mobile lifting solution should be selected using the actual load, stroke, starting height, terrain and load-support requirements.
POW’R-RISER Features
- 60, 100, 150 and 200-ton rated lifting capacities.
- Pneumatic and electric power configurations are available in supported regions and configurations.
- Approximately 4 inches of ground clearance helps movement over rail and rough terrain.
- Double-acting hydraulic cylinder.
- Three-position handle assists tilt-back movement and transport.
- Enclosed 24-inch-wide frame minimizes exposed fittings and hoses.
- External hydraulic filter is designed for easier service.
- SUP-R-STACK™ extension components increase useful lifting height.
- Optional locking U-rings provide mechanical cribbing around the extended piston.
Extension and spacer stacking limits depend on capacity and stroke. The correct extension arrangement must be used for the exact jack and load. Never exceed the permitted stack configuration.
| Rated Capacity | Stroke | Air-Powered Model Reference | 115V Electric Model Reference |
|---|---|---|---|
| 60 ton | 14" | PRAMA06014L | PREMB06014L |
| 60 ton | 27" | PRAMA06027L | PREMB06027L |
| 100 ton | 16" |
PRAMA10016L PRASA10016L |
PREMB10016L |
| 100 ton | 27" |
PRAMA10027L PRASA10027L |
PREMB10027L |
| 150 ton | 15.5" | PRASA15016L | PREMB15016L |
| 150 ton | 26.5" | PRASA15027L | PREMB15027L |
| 200 ton | 15.3" | PRASA20016L | — |
| 200 ton | 24.3" | PRASA20027L | — |
Hydraulic pressure, air requirements, electrical power and control configuration vary by exact POW’R-RISER model and power source. Always use the technical information for the exact model rather than applying one pressure or power specification to the entire family.
PL
Enerpac POW’R-LOCK™ Self-Locking Mobile Lift System
200 Ton • 14 or 24.5" Stroke • Automatic Load Locking
PL Series — 200-Ton POW’R-LOCK™ Mobile Lift System
Enerpac POW’R-LOCK combines mobile hydraulic lifting with continuous automatic mechanical load locking. The system is designed to maintain positive locking through lifting, lowering and holding without requiring the operator to manually activate and deactivate the locking mechanism.
Two models provide either 14 or 24.5 inches of hydraulic stroke. Both use an external compressed-air supply and a two-button pendant to control raising and lowering.
Where POW’R-LOCK Mobile Lift Systems May Be Used
POW’R-LOCK systems may be used for large mining trucks, heavy off-highway equipment, construction machinery and other heavy vehicles where a mobile 200-ton lifting system with automatic mechanical locking is beneficial.
Applications for Enerpac POW’R-LOCK
Self-locking mobile lift systems may support mining, heavy equipment maintenance, construction, oil sands, industrial fleet service and large mobile-equipment repair.
These are common examples and are not an exhaustive list. POW’R-LOCK may also suit other mobile heavy-equipment lifting applications where the 200-ton capacity, stroke, starting height and air-supply requirements are appropriate.
POW’R-LOCK Features
- Continuous locking protection during lifting, lowering and holding.
- Hydraulic cylinder and lock-nut movement are synchronized for controlled operation.
- Double-acting hydraulic cylinder.
- Two-button pendant permits remote raise and lower operation from up to approximately 20 feet away.
- Nitrocarburized treatment on load-bearing cylinder components improves wear and corrosion resistance.
- Multi-position ergonomic transport handle folds when not in use.
- Tilt load cap helps reduce side-loading.
- Flat load caps, spacers and extensions are available for different lifting setups.
The POW’R-LOCK system provides load-lock protection, but equipment lifting and cribbing procedures still need to follow the applicable safety requirements for the load and work environment.
| Model | Capacity | Stroke | Lifting Speed — Load | Lifting Speed — No Load | Recommended Air Supply | Weight |
|---|---|---|---|---|---|---|
| PL20014-ASA | 200 ton | 14.0" | 2.0 in/min | 2.4 in/min | 130–150 CFM | 1105 lb |
| PL20025-ASA | 200 ton | 24.5" | 2.0 in/min | 2.4 in/min | 130–150 CFM | 1320 lb |
PL models use a user-supplied compressed-air source. Available airflow, regulator setting, pump speed and load affect lifting speed. Confirm the available dynamic air pressure and flow before selecting the system.
Provides a lower-profile alternative where additional lifting clearance is required.
Reduce the gap between the load cap and lifting point to maximize usable hydraulic stroke.
Stackable lifting extensions provide additional setup height when used in the correct approved configuration.
Helps control correct extension stacking when multiple extension components are required.
PLE11 and PLE14 extensions and the PLB12 extension base adapter are intended for the shorter PL20014-ASA configuration. Do not use those components on PL20025-ASA unless specifically approved for the application.
Match the Jack Style to the Actual Lifting Job
Start with the GBJ Series for portable manual hydraulic lifting from 2 through 110 tons.
JH and JHA models combine the pump and hydraulic jack in one self-contained tool.
Compare the minimum jack height carefully. Short GBJ configurations or other low-clearance Enerpac lifting tools may be a better fit.
Powered mobile lifting systems are designed for applications where the jack must be repositioned around heavy equipment.
POW’R-LOCK provides 200-ton mobile lifting with continuous automatic locking during raise, lower and hold functions.
Compare extensions, mobile systems or engineered Heavy Lifting Technology rather than exceeding a jack's approved stroke or extension limits.
Where Specialty Hydraulic Jacks Are Used
Industrial hydraulic jacks are used anywhere heavy equipment or machinery needs controlled lifting from below. The right jack depends on the load, clearance, stroke, support surface, portability and whether the load must remain mechanically supported.
Lift and service large mobile mining equipment, drivetrain components and other heavy machinery.
Support maintenance and repair of trucks, trailers and commercial fleet equipment.
Lift construction and off-highway equipment for component service and maintenance access.
Lift and position industrial machinery during installation, alignment and relocation.
Provide portable lifting force during shutdowns, repairs and plant maintenance.
Support lifting and positioning work on industrial and infrastructure construction projects.
Provide localized lifting and positioning around heavy transportation equipment and large loads.
Portable and mobile hydraulic jacks can provide lifting capability where equipment cannot be brought into a shop.
Lift, position and align equipment, machinery and fabricated assemblies during industrial work.
These are common examples and are not an exhaustive list. Enerpac specialty hydraulic jacks may also be used in other lifting, positioning, service and maintenance applications where the jack's capacity, height, stroke, support conditions and operating requirements are appropriate.
The Details That Matter Before Anything Gets Lifted
Determine the real weight being supported by the jack, not simply the total equipment weight.
Measure the available space between the lifting point and the supporting surface.
Determine how far the load actually needs to move before selecting the jack.
Confirm the jack and approved extension arrangement can reach the required final lifting height.
The base must be fully supported on a stable surface capable of carrying the applied load.
Confirm the equipment has an appropriate load-bearing lifting point and the saddle can contact it properly.
Decide whether the jack will be carried by hand, rolled around equipment or remain at one lifting location.
Determine whether the application requires separate cribbing or an integrated mechanical load-locking system.
Manual, pneumatic and electric-powered options have different operating requirements and job-site needs.
Already Have an Industrial Jack?
Northland supports hydraulic jacks and lifting equipment from our Edmonton facility. Send us the model number and photos if you need identification, replacement information, repair support or help matching a different lifting solution.
Common Questions About Enerpac Industrial Jacks
What is the difference between an Enerpac bottle jack and a hydraulic cylinder?
A GBJ bottle jack contains its hydraulic pump and lifting mechanism in one portable unit. A separate hydraulic cylinder normally connects to an external pump by high-pressure hose, which can provide more flexibility for remote operation, multi-point lifting and specialized cylinder configurations.
What is the largest Enerpac GBJ bottle jack?
The GBJ100 is rated in the 110-ton capacity class and provides 5.91 inches of hydraulic stroke with an 11.81-inch minimum height.
What is the difference between POW’R-RISER and POW’R-LOCK?
POW’R-RISER is a powered mobile lifting jack family covering 60 through 200-ton capacities. POW’R-LOCK is a 200-ton mobile lift system that adds continuous automatic mechanical load locking throughout lifting and lowering.
Is the Enerpac POW’R-RISER available in Canada?
The PR-Series POW’R-RISER is not currently offered for sale in Canada. Northland can review the required load, height, stroke and application and help identify an appropriate alternative for a Canadian job.
Can Northland help identify an older JH or JHA hydraulic jack?
Yes. Send Northland the model number, nameplate information and clear photos. We can help identify the jack, review repair possibilities and check suitable replacement or current product options.
What information should I provide when asking for a hydraulic jack?
Start with the load to be lifted, minimum available height, required stroke or final height, available base area, job-site conditions, how often the jack will be moved and whether the raised load needs mechanical support.
Tell Us What You’re Lifting & How Much Room You Have.
Northland can help compare Enerpac industrial bottle jacks, hydraulic jacks, mobile lifting systems and other high-force lifting options. Send the load, minimum height, required stroke and application details and we can help identify a practical starting point for your job in Edmonton, Alberta or elsewhere in Western Canada.
