Enerpac HF Oil
For compatible powered hydraulic pumps.
- HF Series / ISO VG 32
- Designed for powered pumps
- Anti-sludge, anti-rust and anti-foam additives
- Available in multiple container sizes
Industrial Hydraulic Oil • Edmonton, Alberta
Northland carries standard hydraulic oils, environmentally considerate biodegradable options, specialty low-temperature oil and Enerpac HF/LX hydraulic oil for high-pressure tools and pumps. If you are not sure what belongs in the reservoir, send us the make and model before you pour.
Hydraulic Oil Options
Hydraulic fluid is doing more than filling the tank. It transfers power, lubricates components, carries heat and helps protect the system from wear, rust and contamination. Northland can help identify the correct grade or specialty fluid before you change or top up the system.
General Industrial Hydraulics
Northland carries standard hydraulic oils selected to meet or exceed applicable equipment specifications for industrial hydraulic systems.
Environmental Applications
Ask about hydraulic-fluid options intended for environmentally sensitive applications, including fluids with strong wear, oxidation, corrosion and water-separation performance.
Cold-Weather Hydraulics
Northland carries specialty low-temperature hydraulic oil for cold-weather operation, including options designed to perform at temperatures down to approximately -50°C.
Enerpac Powered Pumps
HF Series oil is formulated for Enerpac powered hydraulic pumps, with anti-sludge, anti-rust and anti-foam additives and high-viscosity-index performance.
Enerpac Hydraulic Oil
Enerpac specifies different hydraulic oils for different pump types. Northland’s Enerpac oil page separates HF power-pump oil from LX hand-pump oil so customers do not have to guess based on colour, container or whatever was left beside the pump.
Official Enerpac website ↗
For compatible powered hydraulic pumps.
For compatible manually operated hand pumps.
Northland is not limited to Enerpac oil. Enerpac gets its own section because Northland is an authorized Enerpac distributor and service centre and the HF/LX distinction matters for Enerpac equipment. For other hydraulic systems, send the equipment manufacturer, model and specified oil grade and we can help source the correct fluid.
Which Hydraulic Oil Do I Need?
The correct hydraulic oil depends on the pump or machine manufacturer’s specification, the operating temperature, duty cycle and application. These are useful starting points, not substitutes for the equipment manual.
For Enerpac powered pumps, check the applicable manual for the specified HF oil. For other brands, send the make and model.
Check My Pump →Hand pumps may use a different viscosity than powered pumps. Enerpac LX is formulated specifically for compatible hand pumps.
Ask Northland →Low-temperature operation changes viscosity and pump behaviour. Ask about specialty cold-weather hydraulic-fluid options.
Ask About Low-Temp Oil →Ask about biodegradable hydraulic-fluid options where environmental requirements are part of the job.
Ask About Eco Oil →Why the Correct Hydraulic Oil Matters
If hydraulic oil is too thick for the operating conditions, the pump may become sluggish or struggle to draw fluid. If it is too thin, internal leakage and wear can increase. Contamination, water and degraded oil can also contribute to corrosion, foaming and poor system performance.
Ask Northland About Your Oil →More Than Hydraulic Oil
Northland can help with the rest of the hydraulic system too. If the oil question started because the pump is leaking, noisy, slow or contaminated, send us the equipment details instead of treating fluid as the only problem.
Edmonton, Alberta & Western Canada
Northland supports industrial, mobile-equipment and hydraulic-tool customers from Edmonton throughout Alberta and Western Canada, including Nisku, Leduc, Sherwood Park, St. Albert, Fort Saskatchewan and Acheson.
Frequently Asked Questions
Northland Air Hydraulics supplies standard, specialty low-temperature, biodegradable and Enerpac hydraulic oil from its Edmonton location for industrial hydraulic systems, pumps and high-pressure tools.
Enerpac specifies HF Series hydraulic oil for compatible powered pumps. Northland carries HF100, HF101, HF102 and HF104 package sizes. Always check the manual for the specific pump before filling or changing oil.
HF Series oil is formulated for compatible powered pumps, while LX Series oil is formulated for compatible manually operated hand pumps. They are different viscosity grades and should not be treated as interchangeable.
Yes. Northland carries specialty low-temperature hydraulic-fluid options for cold-weather applications, including products intended for operation at temperatures down to approximately -50°C.
Yes. Northland offers environmentally considerate biodegradable hydraulic-fluid options. Contact Northland with the equipment and application so compatibility and required performance can be checked.
Do not assume different hydraulic oils are compatible. Check the equipment manufacturer’s requirements before mixing fluids or viscosities. Enerpac documentation specifically warns against mixing oils of different viscosities in certain equipment.
Yes. Incorrect viscosity or fluid chemistry can contribute to poor lubrication, cavitation, heat, internal leakage, sludge, corrosion and shortened component life. Use the oil specified for the equipment and operating conditions.
Cloudy, milky, unusually dark or contaminated oil can indicate water, degradation or contamination. If the equipment is behaving differently or the fluid condition is questionable, check the manufacturer’s maintenance instructions or have the system inspected.
No. Northland carries standard and specialty hydraulic oils for multiple applications and manufacturers. Enerpac has a dedicated section because Northland is an authorized Enerpac distributor and the correct HF or LX oil matters for Enerpac pump performance and warranty requirements.
Send it to Northland. We can help narrow down the hydraulic oil before anything questionable gets poured into the system.