Build and service 10,000 psi Enerpac hydraulic systems with genuine Enerpac fittings, hydraulic couplers, manifolds and valves. Northland Air Hydraulics supplies high-flow and flush-face couplers, FZ / BFZ fittings, A / AM / SFM manifolds, VM / VE / VC directional valves, and V-Series pressure and flow control valves for pumps, cylinders, presses, lifting systems and industrial hydraulic tools.
Use the model reference and component finder below to compare connection type, thread size, flow, pressure rating, cylinder type and valve function before choosing a system component.
Thread size alone is not enough. Pressure rating, flow, valve function, cylinder type and coupler family all matter.
Enerpac hydraulic system components connect and control pumps, cylinders, hoses, gauges and hydraulic tools. This page covers the current 10,000 psi coupler families, FZ / BFZ / XSC fittings, A / AM / SFM / AMGC manifolds, VM / VE / VC directional control valves, configurable VE modular valves, and V-Series pressure, flow and load-control valves.
Common model searches include Enerpac C604, CR400, CH604, F604, A604, A630, T630, XSC1, AM21, AM41, SFM41, SFM42, VM33, VM43, VC20, V82, V91, V66, V152 and V161. Northland supports Enerpac hydraulic component selection in Edmonton, Alberta and across Western Canada.
Choose the component category and function. The matching models below are drawn from the same model data used throughout this page.
Search a full or partial model such as C604, CR400, FZ1616, AM41, SFM41, VM33, VC20, V152 or NV251.
Enerpac couplers provide quick hydraulic-line connections for pumps, cylinders, hoses and torque tools. The current 10,000 psi range includes high-flow, flush-face, regular Spee-D, small regular and torque-wrench spin-on couplers.
Enerpac hydraulic fittings are used to adapt thread sizes, change direction, split hydraulic lines and connect pumps, cylinders, hoses, gauges and control components. The fittings listed below are the current 10,000 psi fittings shown in the system-components section.
Enerpac manifolds centralize multiple hydraulic connections and can provide basic distribution, control of multiple single-acting cylinders, pressure monitoring or pressure-compensated flow control for multi-point lifting.
Directional valves control cylinder advance, hold and retract functions. VM and VE valves mount to compatible Enerpac pumps, while VC-Series valves provide remote manual control. Locking models provide hydraulic load holding until the valve is shifted to retract.
The modular VE-Series is a configurable valve platform rather than a short fixed model list. Enerpac's ordering system combines flow path, voltage, accessory valves and mounting arrangement. Maximum flow is 4.0 gal/min and maximum operating pressure is 10,000 psi.
| Valve Prefix / Code | Flow Path | Application |
|---|---|---|
| VEA | 4-way, 3-position open center | Double-acting |
| VEB | 4-way, 3-position closed center | Double-acting |
| VEC | 4-way, 3-position tandem center | Double-acting |
| VED | 4-way, 3-position float center | Double-acting |
| VEE | 4-way, 2-position crossover offset | Double-acting |
| VEF | 3-way, 3-position tandem center | Single-acting |
| VEG | 3-way, 3-position closed center | Single-acting |
| VEH | 2-way, 2-position normally closed | System unloading |
| VEK | 2-way, 2-position normally open | System unloading |
| VEM | 4-way, 2-position float offset | Double-acting |
| VEP | 3-way, 2-position normally open | Single-acting |
Current Enerpac directional-valve accessories include Venturi return retrofit kits and spring-centered conversion kits for compatible VM and VC valves.
V-Series valves handle functions such as flow metering, gauge damping, check-valve control, load holding, pressure relief and sequencing. The series is rated for 10,000 psi maximum operating pressure with NPTF porting.
Northland Air Hydraulics supplies Enerpac high-pressure hydraulic components for pumps, cylinders, hoses, presses, lifting systems and industrial tools. If you are matching an existing system, send the pump, cylinder or tool model plus photos of the existing ports and couplers so the pressure rating, thread, flow path and connection arrangement can be checked before ordering.
C604 is the 3/8 in NPTF high-flow complete coupler set. Its female half is CR400 and its male half is CH604.
AM41 is a basic control manifold for four single-acting cylinders. SFM41 is a pressure-compensated split-flow manifold for four single-acting cylinders and includes gauges, flow controls and CR400 couplers.
V152 is the adjustable pressure-relief valve with an 800-10,000 psi adjustment range. V152NV provides the same basic function with Viton seals.
T630 is the 1/4 in spin-on torque-wrench coupler set, using TR630 female and TH630 male halves.
VM-Series valves are pump-mounted manual directional valves. VC-Series valves are remote-mounted manual directional valves and include a return-line kit.
C604 is the 3/8 in NPTF high-flow coupler set rated for up to 2100 in³/min. F604 is the 3/8 in NPTF flush-face coupler set rated for up to 2500 in³/min and is designed for push-to-connect, low-spillage service.
AM41 is the basic control manifold for four single-acting cylinders and has seven 3/8 in NPTF ports. For pressure-compensated multi-point flow control, SFM41 is the split-flow manifold for four single-acting cylinders.
XSC1 is the 3/8 in swivel connector for orienting hydraulic connections on cylinders, pumps and hoses.
Send Northland clear photos, model numbers, thread sizes and the pump / cylinder models. We can help identify the correct high-pressure component and connection arrangement.
To view our full line of Hydraulic Oil, Manifolds & Fittings click on the link below:
