Enerpac Hydraulic Gauges, Force Gauges & Gauge Selector
Select Enerpac hydraulic pressure gauges, force gauges, digital gauges, high-pressure test gauges, gauge adaptor assemblies and gauge accessories by pressure range, force range, connection, mounting style and application. Northland Air Hydraulics supports Enerpac hydraulic systems from Edmonton for customers across Alberta and Western Canada.
Start with what you need to measure.
Pressure, force, digital pressure and proof-test pressure use different gauge families.
Find the Right Enerpac Gauge
Select what you need to measure first. The next choices will update automatically and only valid matching models will be shown.
Already know the gauge model?
Search a full or partial model such as G2535L, GF50P, GF50B, H4049L, T6011L, DGR2, GA45GC or V91.
Choose the gauge around the measurement and the system.
Start with the maximum pressure you need to observe, then confirm whether you need pressure only, a cylinder-force reference, digital readout or a dedicated proof-test gauge. Connection size, mounting orientation, cycle frequency and the correct adaptor or valve are also part of the complete gauge setup.
GF-Series Hydraulic Force & Pressure Gauges
Enerpac GF-Series gauges combine hydraulic pressure with a force or load reference on a large 4-inch glycerine-filled dial. They are intended for applications where the operator needs to relate system pressure to the force produced by a compatible cylinder or press, rather than watching pressure alone.
GF force gauges are commonly used for hydraulic pressing, load monitoring, weighing, testing, maintenance and controlled-force work. The force scale must be matched to the intended cylinder or press application; the page selector therefore shows the compatible application groups and required gauge adaptor.
GP-Series Dry Hydraulic Pressure Gauges
Enerpac GP-Series gauges are 4-inch dry pressure gauges for straightforward visual monitoring of hydraulic system pressure. Their large dial, stainless-steel case and dual psi/bar scale make them useful on presses, cylinders, pumps and hydraulic test setups.
GP gauges are most likely to be used when pressure - rather than calculated cylinder force - is the key value. Common jobs include pressure checking, press setup, troubleshooting, test work and general maintenance on industrial hydraulic systems.
G-Series Glycerine-Filled Hydraulic Pressure Gauges
Enerpac G-Series pressure gauges use glycerine damping to stabilize the pointer and protect pressure-sensing components. The range includes low-pressure through 15,000 psi models, multiple dial sizes, lower-mount and center-rear configurations, and 1/4 or 1/2 inch NPTF connections.
G-Series gauges are the everyday hydraulic pressure-monitoring choice for lifting cylinders, hydraulic pumps, presses, maintenance systems and test circuits where a damped analog reading helps the operator see system pressure clearly.
H-Series High-Cycle Dry Hydraulic Pressure Gauges
Enerpac H-Series gauges are dry 10,000 psi pressure gauges intended for high-cycle and harsh-environment hydraulic applications. The current E331 range lists 4-inch lower-mount versions with either 1/4 or 1/2 inch NPTF connections.
H-Series gauges are suited to repeated hydraulic cycling, production equipment, demanding maintenance systems and harsh industrial service where a dry gauge is preferred. Enerpac recommends a snubber or needle valve to isolate and protect the gauge when appropriate.
T-Series High-Pressure Test System Gauges
Enerpac T-Series test gauges are large-face analog gauges for proof testing and high-pressure hydraulic systems from 1,000 to 50,000 psi. Depending on model, connections are 1/2 inch NPTF alloy steel or 0.25 inch cone stainless-steel designs.
T-Series gauges are most likely to be used for hydraulic proof testing, valve and component pressure tests, ultra-high-pressure hand-pump systems and controlled test work where a large readable dial and maximum indicator pointer are valuable.
DGR2 Digital Hydraulic Pressure Gauge
The Enerpac DGR2 provides a digital hydraulic pressure display up to 20,000 psi with selectable psi, bar, MPa and kg/cm2 units. It combines ±0.25% full-scale accuracy with a back-lit display, zero reset, IP65 protection and a battery-powered portable format.
DGR2 is useful for hydraulic diagnostics, pressure verification, troubleshooting, test setups and applications where a digital value is easier to read than an analog pointer. It can display four pressure units without changing gauges.
GA45GC Gauge Adaptor & AMGC Gauge Manifold Assemblies
Enerpac GA45GC combines a 10,000 psi G2535L gauge, angled adaptor and CR400 female coupler into one ready-to-install pressure-monitoring assembly. AMGC41 and AMGC42 add four G2535L gauges to protected multi-port manifolds for single- or double-acting cylinder circuits.
These assemblies are useful when technicians want a complete pressure-monitoring solution instead of sourcing the gauge, adaptor and couplers individually. Applications include lifting systems, cylinder circuits, maintenance equipment and multi-point hydraulic setups.
Enerpac Gauge Adaptors, Snubbers & Gauge Accessories
Enerpac gauge accessories make it easier to install, orient and protect hydraulic gauges. The range includes GA adaptors, a swivel adaptor, positive shut-off needle valves, a snubber valve, peak indicator pointer and cone-mount accessories for high-pressure test gauges.
Gauge accessories are commonly used to add a gauge to a pump or cylinder circuit, improve viewing angle, damp pressure pulsation, isolate a gauge during repeated cycling or connect test gauges to cone-fitting high-pressure systems.
Enerpac Hydraulic Gauges in Edmonton & Western Canada
Northland Air Hydraulics supplies Enerpac pressure gauges, force gauges, digital gauges, gauge adaptor assemblies and pressure-monitoring accessories for hydraulic lifting, pressing, maintenance and test systems. If you already know the pump, cylinder, press or gauge connection, send the model numbers and operating pressure so the complete gauge, adaptor and accessory combination can be checked.
Common gauge-selection questions
What is the difference between G-Series and H-Series gauges?
G-Series gauges are glycerine-filled and cover a broad range of pressures and mounting styles. H-Series gauges are dry 10,000 psi gauges intended for high-cycle and harsh-environment use.
When should I use a GF force gauge instead of a pressure gauge?
Use GF-Series when you need a force or load reference tied to a compatible cylinder or press. The force scale is application-specific, so match the gauge to the intended cylinder or press rather than choosing only by pressure.
Can DGR2 be used to 20,000 psi with a GA3 adaptor?
No. DGR2 is rated to 20,000 psi, but GA3 is rated to 10,000 psi. The assembled circuit is limited by its lowest-rated component.
Which gauge is intended for proof pressure testing?
T-Series test system gauges are the dedicated high-pressure analog test range, with models from 1,000 through 50,000 psi and integral maximum indicator pointers.
What can help protect a gauge in a high-cycle hydraulic circuit?
Enerpac lists snubbers and needle valves for gauge protection in high-cycle service. V91 meters oil out of the gauge and can also provide positive shut-off.
Not sure which gauge, adaptor or connection you need?
Send Northland the pump or cylinder model, expected pressure, required reading and connection size. We can help narrow the correct gauge and the parts needed to install it.
