Intelli-Lift 2.0 combines dual wireless communication, graphical lift feedback, safety programming, automatic data logging and remote troubleshooting capability in a portable gantry-control platform.

• Dual wireless communication using 2.4 GHz and Ultra-Wideband technology
• 7-inch full-colour HD display
• Proportional joystick control for lifting, side-shift and travel
• Controls and synchronizes up to eight gantry legs
• Automatic data logging and stored lift records
• Remote troubleshooting capability

• Weight: 9.15 lb / 4.15 kg
• Compatible gantry series: SL and SBL
• Published compatible gantries include SBL600, SBL900, SBL1100, SL200, SL400 and SL400N

• PLd-certified emergency stop
• Programmable stroke, load and speed limits
• Rechargeable Li-ion battery power
• Integrated on-screen user guidance

Complex heavy lifting, transformer moves, equipment installation, plant relocation and synchronized gantry lifts.

The LGH3100 uses self-centering Lock-Grip jaws so all jaws move together during setup. The three-jaw puller can also be converted to a two-jaw configuration when clearance is limited.

• Synchronous jaw movement for easier alignment
• Lock-on jaws for secure gripping
• Hydraulic pulling force for more control and less operator effort
• Hydraulic scissor-lift height adjustment
• Rolling industrial cart with forklift pockets
• ZE3-Series two-stage electric pump and remote pendant
• Built-in pressure gauge

• 3-jaw capacity: 100 tons / 931 kN
• 2-jaw configuration capacity: 70 tons / 622 kN
• Maximum pressure: 10,000 psi / 700 bar
• Maximum reach: 48 in / 1,220 mm
• Maximum spread: 78.15 in / 1,985 mm
• System weight: approximately 2,998 lb / 1,360 kg

• Includes two pushing adaptors
• Includes two point protectors
• Cart centre-height adjustment range: approximately 699–1,679 mm

Heavy industrial maintenance, rail, mining, power generation and removal of large shaft-mounted components.

The RP70A2L expands Enerpac’s modular rail-stressor platform with a longer-stroke configuration and under-mount components for applications where access and service-vehicle clearance matter.

• Modular system assembled directly at the worksite
• Under-mount and over-mount use
• Lightweight aluminium cylinders with rod protection
• Tool-free, rapid field assembly
• Compatible with cordless ZC-Series hydraulic power

• Pull capacity: 70 tons / 683 kN
• Push capacity: 45 tons / 440 kN
• Maximum pressure: approximately 8,400 psi / 580 bar
• RP70A2L cylinder stroke: 380 mm
• 175 mm more travel than the 205 mm RP70A2 configuration

• Designed to hold rail in neutral length during welding
• Published ZC-Series pump compatibility for zero-emission stressing setups

Rail stressing, thermite-welding preparation, track maintenance and rail-failure repair.

Sync-Drive brings coordinated tandem motion to the E-Mover platform. Two or more units continuously communicate so steering and travel can be synchronized while the operator remains at a distance with a wireless remote.

• Real-time synchronized tandem motion
• Zero-radius, carousel, crab and dual-axis steering modes
• Wireless proportional travel and steering control
• Supervisor mode for monitoring large or complex loads
• Automatic shutdown during signal loss
• Battery-powered, quiet, emission-free movement

• Capacity: 28 imperial tons / 25 metric tonnes / 250 kN per unit
• Weight: approximately 1,245.6 lb / 565 kg
• Suitable for clean, even surfaces
• Can accommodate floor joints up to approximately 0.19 in high or 0.55 in wide
• Published gradient capability up to 1.5%

• Polyurethane traction wheels
• Nylon load wheels
• 360-degree tilt swivel saddle

Machinery relocation, transformer handling, production equipment moves and heavy-load positioning in confined industrial spaces.

The SFP-B integrates battery power, split flow and individual pressure control in a transportable frame for remote, temporary and mobile lifting jobs.

• Four split-flow outlets
• Works with single-acting and double-acting cylinders
• Solenoid advance / hold / retract control
• Adjustable pressure relief and gauge for each circuit
• Motor-speed flow adjustment
• Forklift slots, lifting eyes and protective frame

• Maximum pressure: 10,000 psi / 700 bar
• Usable oil capacity: 36 gal
• Oil flow per outlet at 10,000 psi: approximately 18–55 in³/min
• Motor size: 8.8 hp
• Published runtime: up to approximately 75 cumulative minutes at full capacity
• Weight: approximately 1,268 lb

• No exhaust fumes at point of use
• Reduced cable management compared with temporary electric setups

Multi-point lifting, skidding, shutdown work, infrastructure and remote or indoor controlled-lifting projects.

SFP-D models provide multiple independently controlled high-pressure circuits in 4-, 6- and 8-outlet diesel configurations.

• Self-contained diesel power
• 4-, 6- or 8-outlet models
• Manual advance / hold / retract control
• Adjustable pressure-relief valve per circuit
• Pressure gauge on each circuit
• Works with single-acting and double-acting cylinders

• Maximum pressure: 10,000 psi / 700 bar
• Usable oil capacity: 30 gal
• SFP419MD: 4 outlets
• SFP634MD: 6 outlets, 65 hp motor, approximately 208 in³/min per outlet at 10,000 psi
• SFP837MD: 8 outlets, 74 hp motor, approximately 224 in³/min per outlet at 10,000 psi

• Transport-ready frames for movement and repositioning
• Designed to reduce dependency on separate generators and temporary power infrastructure

Remote heavy lifting, skidding, infrastructure, bridge work and high-tonnage controlled-lifting projects.

TJP308 combines a compact footprint with a 7.87-inch stroke and mobile aluminium construction for crowded plant floors and machinery-moving work.

• Lightweight aluminium construction
• Foldable side legs
• Long removable handle
• Integrated solid-rubber transport wheels
• Three-position tilting toe
• Remote hydraulic power keeps the operator farther from the load

• Capacity: 33 imperial tons
• Stroke: 7.87 in
• Oil capacity: 54 in³
• Weight: 176 lb
• Minimum retracted toe clearance: approximately 1.47 in

• Includes RAC308 single-acting cylinder
• Includes CR400 female coupler

Machinery moving, installation, alignment, plant maintenance and lifting in tight spaces.

The LU-Series focuses on portability and real torque-wrench duty cycles instead of oversized continuous-duty pump architecture.

• Compact 41 lb package
• Multiple lifting points and angled handles
• 20 ft detachable pendant control
• Upward-facing 4-inch glycerine-filled gauge
• Quick-disconnect couplers and removable gauge
• Two-stage hydraulic output
• Protective roll cage and front plate

• Maximum pressure: 10,000 psi / 700 bar
• Reservoir capacity: 183 in³
• Usable oil capacity: 115 in³ / 0.5 gal
• Rated-pressure flow: 20 in³/min
• No-load flow: 190 in³/min
• Motor: 0.73 hp, 115 V, single phase, 50/60 Hz
• Sound level: approximately 82–85 dBA

• Designed for intermittent bolting duty
• Detachable components simplify service and calibration

Hydraulic torque-wrench work, flange bolting, shutdown maintenance and portable industrial bolting.

CR-Series sets use interlocking U-Rings and spacers to replace improvised timber or steel cribbing with dimensionally consistent components designed to work together.

• Interlocking U-Rings mechanically support the load
• Spacers extend lifting reach
• Integrated pin system helps maintain alignment
• Placement fork helps keep hands away from the load
• Complete sets include dedicated storage and transport cases

• Standard sets published for 30-, 50- and 100-ton RCS cylinders
• Tall sets published for 100- and 150-ton HCR/RAR cylinders
• Additional top spacers and U-Rings can increase stack height

• Adaptor plates are published for select tall-set / cylinder combinations
• Individual U-Rings and spacers are also listed separately

Staged lifting, maintenance, machinery positioning and critical lifting work where controlled mechanical support is required.

PPH kits use a lightweight hollow-plunger cylinder, stackable C-shaped column sections and quick-nut accessories to replace hammering, torching and improvised pin-removal methods.

• Controlled hydraulic pin extraction
• Stackable C-shaped locking columns
• Spring-loaded locking pins
• Quick Nuts for faster attachment and removal
• Integrated lifting and rigging points
• Storage case for deployment and transport

• Stroke: 3.94 in / 100 mm
• Maximum system pressure: 10,000 psi / 700 bar
• PPH66 weight: approximately 48.9 lb / 22 kg
• PPH66 published compatible pump series: XC2, PATG, ZU4 and ZE2

• Accessory locking columns: PPH40C and PPH66C
• Quick Nut options are published in imperial and metric thread sizes
• Common PPH66 quick nuts include PPH66Q125U12, PPH66Q150U12, PPH66QM36X40 and PPH66QM48X50

Excavators, loaders, mining machinery, construction equipment and heavy-equipment joint-pin maintenance.

BTW-Series tools use digital motor vectoring, factory calibration, battery power and a planetary gear drive to provide repeatable field bolting without a separate hydraulic pump and hose system.

• Integrated digital motor vectoring
• Torque target set through LED interface
• ±5% published accuracy across the operating range
• Brushless motor
• Compatible with Cordless Alliance System batteries
• Supplied with cast reaction arm and storage case

• Torque range across family: 500–6,000 ft-lb
• Square drive sizes: 3/4 in, 1 in and 1-1/2 in
• BTW500B: 120–500 ft-lb
• BTW3000B: 750–3,000 ft-lb
• BTW6000B: 1,200–6,000 ft-lb

• B-series kits include two 18 V 5.5 Ah batteries
• 60-minute fast charger included in B-series kits
• Calibration certificate supplied with BTW-Series tools
• Optional 8 Ah battery available
• Multiple reaction-arm and extended-drive accessories are published

Flange bolting, industrial maintenance, wind, field service and applications where a fully self-contained torque tool is preferred.

Mining Toolbox Sets package matched cylinders, pumps, hoses, couplers, gauges and accessories into lockable cases so common maintenance jobs can be approached as complete systems.

• Task-based tool selection
• Matched pumps, cylinders, hoses, couplers and gauges
• Protective fitted toolbox storage
• Cordless and hand-pump configurations
• Wheeled toolbox option for mobile field maintenance

• Maximum system pressure: 10,000 psi / 700 bar
• SC100RARPC weight: approximately 84 lb
• SCMRSMPCW weight: approximately 43 lb
• SCMRSMPH weight: approximately 77 lb

• SC100RARPC includes XC2404M pump, two batteries and charger, GA45GC gauge/adaptor with G2535L gauge, two HC7210 hoses, RAR1008 100-ton cylinder, CR400 coupler, two CH604 couplers and two fitted toolboxes
• SCMRSMPCW includes SC1201MB pump, batteries and charger, GA45GC gauge/adaptor, HA7206 and HC7206C hoses, RSM50 / RSM100 / RSM200 cylinders, CH604 coupler and wheeled lockable toolbox
• SCMRSMPH includes P142 hand pump, GA45GC gauge/adaptor, HA7206 and HC7206C hoses, RSM50 / RSM100 / RSM200 cylinders, CH604 coupler, FZ1612 street tee and lockable toolbox

Crawler-track maintenance, wheel removal, mining field service and recurring heavy-equipment maintenance tasks.

TL248 lifts track from below using four framed hydraulic cylinders and centralized controls, reducing reliance on crane trucks or side booms in restricted locations.

• Four framed lifting cylinders
• Self-powered compact system
• Colour-coded hydraulic circuits
• Integral LED work lighting
• Retractable hose reel
• Fork pockets and dual lifting points for transport

• Combined lifting capacity: 248 tons
• Maximum pressure: 10,000 psi / 700 bar
• Stroke: 5.91 in / 150 mm
• Pump flow: approximately 3.3 L/min / 200 in³/min
• Engine: approximately 10.5 hp
• Reservoir: approximately 10.3 gal / 40 L
• System weight: approximately 1,660 lb

• Designed for lifting up to four diamond crossings or six switches per day under suitable conditions
• Four cylinders can be controlled independently for leveling
• Redundant valving helps prevent cylinder drift

Turnouts, diamond crossings, switches, retarders, bridge ends and other complex rail-lift maintenance.

XC2 uses a 54 V brushless motor and bladder reservoir to deliver 10,000 psi portable hydraulic power with higher flow, more oil capacity and longer runtime than the original XC platform.

• 54 V high-capacity battery platform
• Brushless motor
• Maximum pressure up to 10,000 psi / 700 bar
• Bladder reservoir allows operation in multiple orientations
• Manual and electric valve configurations
• Dedicated cordless torque-pump variants
• Enerpac Connect compatibility on supported models

• Rated-pressure flow: approximately 20 in³/min
• 2 L / 122 in³ and 4 L / 241 in³ usable-oil configurations
• Manual single-acting, electric single-acting, manual double-acting and torque-pump versions
• XC2202MB weight: approximately 26.3 lb
• XC2504BB weight: approximately 37.1 lb

• SSTRP55 shoulder strap accessory
• XC2T torque-pump models include detachable pendant and 4-inch glycerine-filled gauge
• Published XC2T family also includes versions supplied without batteries/charger

Lifting, pulling, splitting, double-acting cylinder work, cutting and hydraulic bolting where cordless hydraulic power is valuable.