Enerpac Industrial Tools & Tool Selector
Find Enerpac pullers, hydraulic punches, maintenance sets, machine-moving tools, lifting wedges, spreaders, pipe benders, rail tools and industrial cutters for demanding maintenance, construction, manufacturing, mining, fabrication and field-service work. Northland Air Hydraulics supports Enerpac industrial tools from Edmonton for customers across Alberta and Western Canada.
Choose a tool family below, answer the series-specific questions, and matching model numbers will appear only after you make a selection.
Start with the job.
The page is organized around the work being done instead of forcing you to memorize model numbers.
Already know the model number?
Search a full or partial model such as LGH314, MS210, STB202E, EBH35, ECCE32B or WMC1250.
Built around the application - not just the tool name.
The Enerpac industrial-tool range spans component removal, maintenance, punching, low-clearance lifting, machine moving, spreading, pipe bending, rail maintenance and controlled cutting. The sections below keep technical model data available for search while letting visitors filter only the products relevant to their job.
Pullers
Hydraulic and mechanical pullers for controlled removal of bearings, gears, hubs, pins and shaft-mounted components.
MPS / SGH Hydraulic Sync-Grip Puller Sets
Enerpac Sync-Grip hydraulic puller sets use synchronized jaw movement and hydraulic pulling force for controlled removal of gears, bearings, bushings, hubs and similar shaft-mounted components. Hand, air, cordless and electric pump packages support shop and field maintenance.
Where this series is most often used: These sets are most useful when a complete powered puller package is preferred for repetitive bearing, gear and hub removal in maintenance shops or field service.
Narrow the right model
BHP-Series Hydraulic Pullers, Puller Sets & Attachments
Enerpac BHP-Series products include complete master puller sets, grip puller sets, cross-bearing puller sets, bearing cup pullers and bearing separators for controlled removal of bearings, gears, seals and other shaft-mounted components.
Where this series is most often used: BHP systems are commonly selected by maintenance departments that need several puller styles in one hydraulic kit for bearings, cups, gears and difficult shaft-mounted components.
Narrow the right model
LGM-Series Mechanical Lock-Grip Pullers
LGM mechanical Lock-Grip pullers use synchronized, self-centering jaw movement for easier one-operator setup on wheels, sprockets, bearings and other shaft-mounted components where hydraulic power is not required.
Where this series is most often used: Mechanical Lock-Grip pullers are a practical choice for routine bearing, sprocket and wheel removal where a compact self-centering puller is preferred over a hydraulic setup.
Narrow the right model
LGH-Series Hydraulic Lock-Grip Pullers & Pump Sets
LGH hydraulic Lock-Grip pullers combine synchronized lock-on jaws with controlled hydraulic force. Choose a puller/cylinder assembly or a complete hand, air or electric pump set for larger shaft-mounted components.
Where this series is most often used: Hydraulic Lock-Grip models are commonly used on larger bearings, gears and hubs in mining, heavy equipment, manufacturing and plant-maintenance work.
Narrow the right model
LGHMS Hydraulic Lock-Grip Master Puller Sets
LGHMS master sets combine a 3-jaw hydraulic Lock-Grip puller with a cross puller, bearing separator, bearing cup puller, detachable hollow cylinder, hose, gauge and a choice of hand, air or electric pump.
Where this series is most often used: Master sets suit MRO and shutdown teams that regularly encounter several different bearing and gear-removal situations and want one comprehensive pulling system.
Narrow the right model
LGH3100 100-Ton Hydraulic Lock-Grip Puller
The LGH3100 is a cart-mounted high-capacity Lock-Grip puller for large wheels, sprockets, bearings and other heavy shaft-mounted components. It includes an electric hydraulic pump and powered lift cart for demanding overhaul work.
Where this series is most often used: The LGH3100 is aimed at major overhaul work involving very large shaft-mounted components, including large wheels, bearings and similar heavy rotating-equipment parts.
Narrow the right model
PPH-Series Hydraulic Pin Pullers
PPH hydraulic pin puller kits are designed for controlled removal of stubborn pins on heavy machinery, mining and construction equipment. Locking column sections, a quick nut and lifting provisions simplify setup and handling.
Where this series is most often used: Pin pullers are commonly used during excavator, loader, mining-truck and heavy-equipment repair where large pivot or linkage pins are difficult to remove conventionally.
Narrow the right model
IPM3 Internal & External Mechanical Puller
The IPM3 mechanical puller uses a slide hammer and dedicated jaw sets for internal and external pulling where spindle support is unavailable.
Where this series is most often used: The IPM3 is useful for internal or external bearing removal when there is no suitable spindle support for a conventional puller.
Narrow the right model
Maintenance & Punching
Portable hydraulic maintenance sets and hole-punching systems for plant, field and fabrication work.
MS-Series Universal Hydraulic Maintenance Sets
Enerpac MS maintenance sets combine a hand pump, hydraulic hose, cylinder, gauge and multiple attachments so technicians can push, pull, lift, press, straighten, spread and clamp from one portable system.
Where this series is most often used: Maintenance sets are intended for general MRO work where technicians may need to push, pull, lift, press, straighten, spread or clamp with the same hydraulic kit.
Narrow the right model
SP / MSP / STP 35-Ton Hydraulic Punch Systems
Enerpac 35-ton hydraulic punches form holes faster than drilling in structural and fabrication work. Tool-only, hand-pump, air-pump, electric-pump and metric punch-set configurations are available.
Where this series is most often used: The 35-ton punch family is commonly used in structural steel, equipment modification, fabrication and field installation where repeated clean holes are faster to punch than drill.
Narrow the right model
SP-Series 50-Ton Double-Acting Hydraulic Punch
The 50-ton SP punch uses a double-acting cylinder for fast cycle times and is offered as SP50100 with the SP50 punch and standard punch/die sets, or as SP5000 with the 115 V ZE4410SBN electric pump and two hydraulic hoses.
Where this series is most often used: The 50-ton punch is better suited to heavier material and production-style punching where double-acting return improves cycle time.
Narrow the right model
Lifting & Moving
Low-clearance lifting wedges, machine lifts, wheeled skates, powered skates and heavy-duty load-moving systems.
LW-Series Hydraulic Vertical Lifting Wedges
LW lifting wedges provide controlled vertical lift from an insertion gap as small as 0.39 inch. Choose an externally powered LW16 or LWC16 with integrated hand pump for machinery positioning and skate placement.
Where this series is most often used: Lifting wedges are commonly used to create the first controlled lift under machinery so skates, shims or other lifting equipment can be positioned.
Narrow the right model
SOH-Series Hydraulic Machine Lifts
SOH machine lifts use a low-height toe and remote hydraulic power to raise heavy machinery where access beneath the load is limited. Extendable support feet improve stability for machine moves and installation work.
Where this series is most often used: Machine lifts are frequently used by millwrights and plant-maintenance crews to raise equipment from a very low toe height before relocation or installation.
Narrow the right model
MLS-Series Wheeled Machine Skates
MLS wheeled machine skates are designed for industrial machine movers and millwrights. Steerable, dual and 360-degree rotational designs support straight moves, general maneuvering and tight-space positioning.
Where this series is most often used: Wheeled skates are used for industrial machine moves, production-line relocation and equipment installation where floor protection and maneuverability matter.
Narrow the right model
EMLS / EMV Battery-Powered Machine Skate Systems
Enerpac battery-powered machine skates provide remote-controlled movement for heavy equipment on clean, even floors. Dual-drive motors and proportional wireless controls support one-person machine moves up to 55 tons.
Where this series is most often used: Battery-powered skates are intended for larger facility moves where remote control, reduced manual pushing and precise powered travel can improve productivity.
Narrow the right model
ER / ES / ELP Heavy-Duty Load Skates
Enerpac heavy-duty load skates use rugged chain rollers and low-profile construction to move machinery across industrial floors. Fixed skates, turntable swivels, leveling plates and matched sets cover a wide range of moves.
Where this series is most often used: Heavy-duty chain-roller skates are used for heavy machinery, tanks and industrial equipment on suitable floors where very high carrying capacity is required.
Narrow the right model
Maintenance & Storage
Industrial cases for organizing, protecting and transporting hydraulic tools and complete maintenance systems.
CM-Series Industrial Storage Cases
CM steel storage cases protect hydraulic tools and industrial equipment from dust, water, grease and jobsite damage while helping maintenance teams organize and transport complete tool systems.
Where this series is most often used: Industrial storage cases are used to protect, organize and mobilize hydraulic tools, maintenance sets and accessories between the shop and jobsite.
Narrow the right model
Spreading & Bending
Hydraulic spreading tools and pipe-bending systems for maintenance, installation and fabrication work.
WR-Series Hydraulic Wedgie & Spread Cylinders
WR hydraulic spreading tools separate, position and open loads in confined areas. WR5 is designed for very tight access while WR15 provides a longer spreading stroke.
Where this series is most often used: WR and A-Series spreaders are most useful for confined spreading, positioning and separation work such as machinery alignment and bridge-bearing maintenance.
Narrow the right model
STB-Series Hydraulic Pipe Bender Sets
Enerpac STB pipe benders make smooth, controlled bends in mild-steel pipe. Packages range from bender-only configurations to hand, air and electric pump sets, including Eject-O-Matic models for easier pipe release.
Where this series is most often used: Pipe bender sets are commonly used by industrial maintenance departments, mechanical contractors and fabrication shops for controlled bends in mild-steel pipe.
Narrow the right model
Rail Tools
Specialized hydraulic systems for rail stressing, track lifting and rail pulling.
RP70A2-Series Hydraulic Rail Stressors
RP70A2 rail stressors are modular systems used to pull rail into neutral length for stressing and thermite welding. Standard and under-mount versions support different clearance and travel requirements.
Where this series is most often used: RP70A2 systems are purpose-built for railway maintenance, including neutral-temperature rail stressing, thermite welding setup and rail-gap adjustment.
Narrow the right model
TL248 Hydraulic Track Lift System
The TL248 is a portable, self-powered track-lifting system with four 62-ton cylinders for controlled lifting of rail infrastructure where cranes or side booms are impractical.
Where this series is most often used: The TL248 is used for controlled lifting of turnouts, crossings, switches and bridge ends where overhead access or crane use is limited.
Narrow the right model
RP120BP Hydraulic Rail Puller
The RP120BP is a compact 120-ton rail puller for stressing heavy rail. A swing-arm clamp simplifies setup while an external hydraulic power unit supplies low-pressure, high-flow power.
Where this series is most often used: The RP120BP is intended for heavy rail stressing and gap-control work using an external low-pressure, high-flow hydraulic power unit.
Narrow the right model
Cutters
Hydraulic, electric, cordless and self-contained cutters for bar, chain, cable, wire rope, flat stock and demolition work.
EBH / EBE / EBC Bar Cutters
Enerpac bar cutters cover hydraulic, corded-electric and cordless options for controlled cutting of rebar and industrial metal bar. Hydraulic EBH models suit demanding production work while EBE and EBC tools improve portability.
Where this series is most often used: Bar cutters are commonly used for rebar, reinforcing bar and industrial metal-bar cutting in construction, concrete work, fabrication and manufacturing.
Narrow the right model
EDCH-Series Hydraulic Decommissioning Cutters
EDCH hydraulic decommissioning cutters use large blade apertures for tubes, profiles, communication cables and similar materials found in dismantling and demolition work. Multiple external-pump options balance mobility and cutting speed.
Where this series is most often used: Decommissioning cutters are designed for plant dismantling, demolition and shutdown work involving tubes, profiles, communication cable and similar obstructions.
Narrow the right model
EFBE-Series Electric Flat Bar Cutters
EFBE electric flat-bar cutters provide a controlled alternative to abrasive or torch cutting for flat stock. The deep cutting head accommodates material up to 2.75 inches high and 0.59 inch thick.
Where this series is most often used: Flat-bar cutters are used in fabrication and manufacturing where controlled cutting of flat stock is preferred over abrasive cutting or torching.
Narrow the right model
ECCE-Series Electric Chain Cutters
ECCE electric chain cutters are designed for controlled cutting of selected industrial chain behind a transparent safety guard. The current range supports chain through Grade 120 subject to the model-specific diameter limits.
Where this series is most often used: Chain cutters are common in mining, rigging, material handling, marine and oil-and-gas work where individual chain links must be cut in a controlled manner.
Narrow the right model
EWCH / EWCE Wire & Cable Cutters
Enerpac wire and cable cutters include high-duty hydraulic production models and portable electric tools for controlled cutting of cable and wire rope. Guillotine-style blades reduce spark risk compared with many abrasive cutting methods.
Where this series is most often used: Wire and cable cutters are commonly used in electrical, telecommunications, power-generation, transmission and shipbuilding applications.
Narrow the right model
ECSE-Series Electric Cutter / Spreader Tools
ECSE cutter/spreader tools combine cutting jaws with spreading wedges at the blade tips for applications that require both cutting and separation of metal obstructions.
Where this series is most often used: Cutter/spreader tools are useful in demolition, recycling and industrial access work where a metal obstruction may need to be both cut and spread apart.
Narrow the right model
WHC / WHR Hydraulic Cutterheads
Enerpac hydraulic cutterheads provide guillotine-style cutting of wire rope, round bar, strand and cable using a separate 10,000 psi pump. Most are single-acting spring-return; WHR1250 is double-acting and requires a 4-way valve.
Where this series is most often used: Hydraulic cutterheads are selected for pump-powered cutting of wire rope, cable, bar and strand where the correct material-specific capacity is verified first.
Narrow the right model
WMC-Series Self-Contained Hydraulic Cutters
WMC self-contained hydraulic cutters combine the pump and cutting head in one portable manual tool for field work where carrying a separate hydraulic pump is impractical.
Where this series is most often used: Self-contained cutters suit portable field maintenance and remote work where bringing a separate hydraulic pump would be inconvenient.
Narrow the right model
Enerpac Industrial Tools in Edmonton & Western Canada
Northland Air Hydraulics is an authorized Enerpac sales and service location in Edmonton, Alberta, supporting industrial tools for maintenance, construction, mining, manufacturing, oil and gas, power generation, rail, heavy equipment, fabrication and machine-moving work across Western Canada. We can help match pullers, punches, cutters, spreaders, machine-moving equipment and hydraulic accessories to the application and to hydraulic equipment you already own.
Common selection questions
How do I choose the right Enerpac puller?
Start with required capacity, reach and spread. For hydraulic pullers, also confirm the pump package and any reduced-capacity limits that apply when accessories or two-jaw configurations are used.
Can one hydraulic pump run every Enerpac cutter or punch?
No. Cylinder action, pressure, flow, valve function and hose/coupler requirements vary. Use the model-specific pump notes or have Northland check the complete system.
What is the best way to choose machine-moving equipment?
Confirm total load, weight distribution, floor condition, turning space and the height available to place skates. The lifting method and each individual skate capacity matter, not only the nominal set capacity.
Are all cutter capacities the same for every material?
No. Maximum cutting capacity depends on material type, hardness, tensile strength and tool model. Use the manufacturer material selection chart before cutting.
Can Northland help match a complete industrial-tool setup?
Yes. Send the tool model, application, material or load details and any pumps or accessories you already own. Northland can help identify the missing system components.
Need help choosing the exact tool?
Send Northland the application, model numbers, load or material details, required reach or clearance and any hydraulic equipment you already have.
To view our full line of industrial tools click on the link below:
