HYDRAULIC PRESSES

Enerpac Hydraulic Presses are available in a wide variety of standard capacities and configurations, or you can “build your own” with the easy-to-use matrix. The press frames are a welded construction for maximum strength and durability, and when combined with the power of high-pressure hydraulics, will provide years of safe and dependable service in your workshop. Enerpac press capacities range from 10-ton to 200-ton and are available in Bench, C-Frame, Arbor, H-Frame and Roll-Frame models. Our industrial hydraulic presses are perfect for your pressing needs. Find top-quality hydraulic press solutions in Alberta, Canada

Enerpac Presses

Enerpac hydraulic presses are available in a wide range of standard capacities, configurations, and constructions for workshop, maintenance, fabrication, and production work. From compact bench presses to heavy-duty H-Frame and Roll Frame models, Enerpac presses are built for controlled pressing applications with dependable hydraulic force.

Overview – Hydraulic Press Solutions
Standard Press Range10 - 200 tons
Press TypesBench, Workshop, C-Clamp, Arbor, H-Frame, Roll Frame
ConstructionWelded and Bolted Options
Maximum Operating Pressure10,000 psi

Enerpac press lines include IP-Series H-Frame presses, IPR-Series Roll Frame presses, A-Series C-Clamp and Arbor presses, VLP-Series bench presses, XLP-Series workshop presses, plus a range of accessories and custom press solutions.

Key Features
  • Standard capacities from 10 to 200 tons across the main hydraulic press range
  • Welded frame options for maximum strength and durability
  • Hydra-Lift™ daylight adjustment on many models
  • Horizontal cylinder adjustment on many H-Frame and Roll Frame presses
  • Manual, air hydraulic, and electric pump options depending on series
  • Workshop and Roll Frame presses feature pressure gauges for monitoring force
Common Uses
  • Bearing and shaft removal or installation
  • Bushing, sleeve, and gear pressing
  • General workshop repair and maintenance
  • Fabrication and industrial pressing jobs
  • Custom production applications
Series Overview: IP-Series H-Frame presses cover 10 to 200 tons. IPR-Series Roll Frame presses cover 50 to 200 tons. A-Series C-Clamp and Arbor presses cover 5 to 30 tons. VLP-Series bench presses cover 10 tons. XLP-Series workshop presses cover 25 to 75 tons. Custom hydraulic press solutions are also available.
IP Series – H-Frame Presses
Capacity10 - 200 tons
Maximum Vertical Daylight54.50 in
Maximum Bed Width48.00 in
Maximum Operating Pressure10,000 psi

IP-Series H-Frame presses are built with a quality welded frame for long life and heavy-duty workshop use. Standard models are matched to appropriate pumps, cylinders, hoses, and gauges for a complete press package.

Key Features
  • Quality welded frame for maximum strength and long life
  • Exclusive Hydra-Lift™ bed for easier daylight adjustment on most models
  • Roller head design allows side-to-side cylinder movement and locking
  • Matched standard packages with pump, cylinder, hoses, and gauge
  • Gauge and gauge adaptor included on standard press models
Common Uses
  • Shaft removal and installation
  • Bearing service work
  • General industrial pressing
  • Workshop repair and assembly jobs
Model Overview
Press Capacity Typical Press Models Maximum Daylight Maximum Bed Width Cylinder Stroke Range Cylinder Type
10 ton IPE1215, IPA1220, IPH1240, IPH1234, IPA1244 40.00 in 18.63 in 10 - 14 in Model dependent
25 ton IPE2505, IPE2510, IPA2520, IPH2531 54.50 in 29.00 in 6 - 14 in Model dependent
30 ton IPA3071, IPE3060, IPH3080 54.50 in 29.00 in 8 - 14 in Model dependent
50 ton IPE5010, IPA5021, IPH5030, IPH5031, IPE5005, IPA5073, IPE5060, IPH5080 48.56 in 28.75 in 6 - 13 in Model dependent
100 ton IPA10023, IPE10010, IPH10030, IPE10060, IPH10080 41.00 in 35.00 in 6 - 13 in Model dependent
150 ton IPE15065 48.50 in 48.00 in 13 in Double-acting
200 ton IPE20065 48.50 in 48.00 in 13 in Double-acting
Standard Press Features: IP-Series presses consist of a press frame, power source, and cylinder. Optional accessories include cylinder mounting blocks, V-blocks, pump mounting brackets, and Hydra-Lift™ systems.
Important: Ordering variations outside listed standard packages are handled using the modular matrix. Pump and cylinder combinations should be selected to suit the required speed, stroke, and application.
IPR Series – Roll Frame Presses
Capacity50 - 200 tons
Vertical Daylight37.12 - 51.00 in
Horizontal Daylight28.75 - 48.00 in
Maximum Operating Pressure10,000 psi

IPR-Series Roll Frame presses are designed for larger pressing jobs where the stationary bed and rolling frame arrangement help handle heavier assemblies more effectively. Standard models are matched to electric pumps, cylinders, hoses, and gauges.

Key Features
  • Quality welded frame for maximum strength and long life
  • Frame rolls easily on four steel roller bearings
  • Hydraulic clamp cylinders lock the frame into position
  • Hydra-Lift™ bolster for easy daylight adjustment
  • Standard roller head design allows side-to-side cylinder movement
  • Stationary bed supports heavy loads
Common Uses
  • Heavy shaft removal
  • Large bearing work
  • Pillow block and large assembly service
  • Jobs where overhead crane loading is used
Model Overview
Model Capacity Vertical Daylight Horizontal Daylight Cylinder Model Stroke Electric Pump Model
IPR5075 50 ton 37.12 in 28.75 in RR5013 13.13 in ZE4420SB-N
IPR10075 100 ton 41.28 in 35.00 in RR10013 13.13 in ZE5420SG-N
IPR20075 200 ton 51.00 in 48.00 in RR20013 13.00 in ZE5420SG-N
Gauge Information: Standard IPR-Series presses include a matching gauge and gauge adaptor. Gauge pairings shown in the catalog are matched by press capacity.
A Series – C-Clamp and Arbor Presses
Capacity5 - 30 tons
Maximum Daylight11.88 in
Maximum Bed Width7.00 in
Maximum Operating Pressure10,000 psi

A-Series presses cover compact C-Clamp and Arbor press applications where a smaller footprint and flexible mounting are needed. Hydraulic cylinders and pumps are ordered separately for these presses.

C-Clamp Press Features
  • 5, 10, and 20 ton capacities
  • Operational in all positions
Arbor Press Features
  • 10 and 30 ton capacities
  • Foot mounting holes for horizontal or vertical positioning
  • Machined working surfaces for easier fixturing
  • Slotted back to simplify loading and unloading of longer parts
Model Overview
Press Type Model Capacity Maximum Vertical Daylight Maximum Bed Width Recommended Cylinder
C-Clamp A205 5 ton 6.50 in 2.00 in 5 ton RC cylinder
C-Clamp A210 10 ton 9.00 in 3.25 in 10 ton RC cylinder
C-Clamp A220 20 ton 11.88 in 3.75 in 25 ton RC cylinder, limited to 20 tons
Arbor A310 10 ton 9.06 in 5.31 in 10 ton RC cylinder
Arbor A330 30 ton 10.00 in 7.00 in RC308
Accessory Notes: Optional accessories shown for this series include Push Pin A183 for precision pressing and Smooth Saddle A185 for delicate parts such as aluminum castings.
Important: For high-cycle production applications, the C-Clamp and Arbor presses should be limited to 50% of their capacity. Cylinders and pumps must be ordered separately.
VLP / XLP Series – Bench and Workshop Presses
VLP Capacity10 ton
XLP Capacity25 - 75 tons
Maximum Daylight47.68 in
Maximum Bed Width38.98 in

VLP and XLP presses offer practical workshop solutions ranging from compact bench-top units to larger workshop floor presses. These models are built for standard workshop pressing applications and are offered with several pump and cylinder combinations.

VLP Bench Press Features
  • Compact design mounts conveniently on a bench top
  • Operational in vertical or horizontal position
XLP Workshop Press Features
  • Easy height adjustment with integrated winch mechanism
  • Horizontal cylinder adjustment for flexible load placement
  • Multiple pump options including pneumatic foot-controlled pumps with integrated gauges
  • 50 and 75 ton presses are provided in kit form
  • Forklift access cut-away on larger models for easier transport
Model Overview
Model Capacity Maximum Daylight Maximum Bed Width Pump Model Cylinder Model Stroke
VLP106P142U 10 ton 16.73 in 17.13 in P142 RC106 6.13 in
VLP106PAT1U 10 ton 16.73 in 17.13 in PATG1102N RC106 6.13 in
XLP256P392U 25 ton 47.68 in 20.08 in P392 RC256 6.25 in
XLP256XA11GU 25 ton 47.68 in 20.08 in XA11G RC256 6.25 in
XLP506P802U 50 ton 37.80 in 38.98 in P802 RC506 6.25 in
XLP506XA12GU 50 ton 37.80 in 38.98 in XA12G RC506 6.25 in
XLP5013ZEBU 50 ton 37.80 in 38.98 in ZE4408SB RR5013 13.13 in
XLP5013ZEIU 50 ton 37.80 in 38.98 in ZE4408SI RR5013 13.13 in
XLP756XA12GU 75 ton 37.60 in 38.98 in XA12G RC756 6.13 in
Gauge and Hose Notes: Standard VLP and XLP presses include a hose and gauge. The catalog shows GF10P with HC7206 hose for 10 ton, GF20P with HC7210 for 25 ton, GF50P with HC7210 for 50 ton, and integrated gauge arrangements on models using XA-Series air pumps.
Important: All Enerpac presses are designed exclusively for pressing operations, not for pulling.
Press Accessories
Accessory TypesMounting Blocks, V-Blocks, Hydra-Lift™, Pump Brackets
Use RangeH-Frame, Roll Frame, Bench, Workshop
PurposePositioning, Adjustment, Pump Mounting
MaterialHigh-Strength Steel Components

Enerpac offers a range of press accessories to improve fixturing, pump mounting, daylight adjustment, and cylinder positioning across several press series.

Accessory Overview
Description Press Type / Capacity Model Number
Cylinder Mounting Block 10 ton H-Frame Press IPK1012
Cylinder Mounting Block 25 and 30 ton H-Frame Press IPK3012
Cylinder Mounting Block 50 ton H-Frame Press PK501
Cylinder Mounting Block 100 ton H-Frame Press PK1002
Cylinder Mounting Block 200 ton H-Frame Press PK2002
V-Blocks 10 ton VLP Bench Press VB10
V-Blocks 25 ton XLP Workshop Press VB25
V-Blocks 50 ton XLP Workshop Press VB501
V-Blocks 75 ton XLP Workshop Press VB101
Hydra-Lift™ 25 - 100 ton H-Frame Press IPL100
Hydra-Lift™ 150 - 200 ton H-Frame Press IPL101
Hydra-Lift™ 50 and 100 ton Roll Frame Press IPLR100
Hydra-Lift™ 200 ton Roll Frame Press IPLR200
Pump Mounting Bracket Hand operated and small air pumps PMB1
Pump Mounting Bracket Electric, large hand, and modular air pumps PMB2
Accessory Notes: V-blocks are supplied as a pair. Cylinder mounting blocks allow horizontal cylinder movement. Pump mounting brackets are pre-drilled to accept multiple Enerpac power source options.
Custom Hydraulic Presses
CustomizationCapacity, Stroke, Controls, Guarding, Daylight
ConfigurationsVertical and Horizontal Presses
Mounting OptionsUpper and Lower Bolster Cylinder Mounting
Project SupportDesign, Engineering, Manufacturing

In addition to standard workshop presses, Enerpac offers custom press solutions for applications that need non-standard layouts, wider frames, longer strokes, specialized controls, or higher-accuracy requirements.

Customizable Features
  • Capacity
  • Cylinder stroke
  • Pump type
  • Controls
  • Guarding
  • Daylight dimensions
Configuration Options
  • Vertical and horizontal press designs
  • Cylinders mounted in upper and lower bolsters
  • Height built to customer specifications
  • Vertical and horizontal daylight built to customer specifications
Custom Press Applications: The catalog shows examples ranging from workshop-style custom presses to high-accuracy presses and very high-tonnage automated systems built to customer requirements.
 
Back To Enerpac
Get A Quick Quote