ENERPAC FLANGE MAINTENANCE • EDMONTON

Enerpac Flange Tools

Flange alignment, spreading, closing, valve change-out, nut splitting and flange-facing equipment with model-level force, fit, clearance, dimension and weight data.

Choose the flange tool by access gap, bolt-hole size, flange thickness, required movement and the force needed for the job.

JOINT ASSEMBLY & SEPARATION

Fit the tool to the actual flange geometry.

AlignmentFA and TFA.

SpreadingFSC/FSH/FSM, SWi, SG and MG.

Closing / Change-OutFC and VC.

Nut / Face MaintenanceNC, NSC/NSH and FF120.

TOOL SELECTION

Force, Access Gap, Bolt-Hole Size & Flange Clearances

For flange work, physical fit is as important as force. Compare access gap, bolt-hole range, flange thickness, clearance, tool dimensions and kit weight before choosing the tool.

GapMinimum access and maximum spreading distance.

ForceSpreading, closing, lifting/alignment or cutting force.

FitBolt-hole, flange thickness and clearance ranges.

KitTool, pump and carry-case data where published.

QUICK MODEL SEARCH

Find an Enerpac flange tool

ENERPAC BOLTING

Flange Alignment Tools

FA-Series alignment for pipe flanges and TFA tools for wind-tower flange assembly.

ENERPAC

FA-Series Flange Alignment Tools

6 VARIATIONS

FA tools correct twist and rotational misalignment.

COMMON APPLICATIONSCorrecting twist and rotational misalignment so flange bolts can be inserted without forcing the joint.

COMMON INDUSTRIESPipeline construction, oil & gas, petrochemical, process piping and power generation.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 6 MODELS & FULL SPECIFICATIONS+

Model	Maximum Alignment / Lifting Force	Minimum Bolt Size	Flange Wall Thickness	Tool Weight	Power	Tool Model	Includes
FA1TM	1 ton / 10 kN	0.63 in. / 16 mm	0.55–3.29 in. / 14–82 mm	3.5 lb	Mechanical
FA4TM	4 tons / 40 kN	0.95 in. / 24 mm	1.18–5.23 in. / 30–133 mm	19.0 lb	Mechanical
FA9TE	10 tons / 90 kN	1.40 in. / 35.5 mm	3.66–9.00 in. / 93–228 mm	32.0 lb	Hydraulic
FA1TMSTD						FA1TM	FA1TM tool + kit box
FA4TMSTD						FA4TM	FA4TM tool + kit box
FA9TESTD						FA9TE	FA9TE + HP350S hand pump + hose + pressure gauge + kit box

ENERPAC

TFA Wind-Tower Flange Alignment Tools

10 VARIATIONS

All mechanical, external-hydraulic and integral-hydraulic TFA tool and kit variations with force, fit range, dimensions and weights.

COMMON APPLICATIONSAlignment of large wind-tower flange sections during assembly and installation.

COMMON INDUSTRIESWind-energy tower fabrication, erection and maintenance.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 10 MODELS & FULL SPECIFICATIONS+

Model	Tool Type	Maximum Hook Force per Tool	Maximum Aligning Distance	Maximum Operating Pressure	Flange Fit Range (A)	Adjustment / Reach Range (B)	Alignment Travel / Clearance Range (C)	Tool Thickness / Width (D)	Hook / Reach Range (E)	Hook Thickness / Clearance (F)	Tool Weight	Kit Weight	Carry Case Dimensions	Tool Model
FA4TM	Mechanical	4.5 tons	1.7 in.	Manual	1.4-5.3 in.	0-2. in.	2 0-9.1 in.	0.98 in.	0-4.1 in.	0.94 in.	17.9 lb
TFA4TMSTD	Mechanical	4.5 tons	1.7 in.	Manual	1.4-5.3 in.	0-2. in.	2 0-9.1 in.	0.98 in.	0-4.1 in.	0.94 in.	17.9 lb	39.7 lb	23.6 x 14.6 x 7.9 T	FA4TM
FA12TE	Hydraulic	27.0 tons	2.6 in.	7,400 psi	5.1-7.0 in.	4.3-9 in.	.5 0-16. in.	6 1.80 in.	3.4-4.9 in.	2.40 in.	42.5 lb
TFA12TEMIN	Hydraulic	27.0 tons	2.6 in.	7,400 psi	5.1-7.0 in.	4.3-9 in.	.5 0-16. in.	6 1.80 in.	3.4-4.9 in.	2.40 in.	42.5 lb	62.6 lb	25.2 x 21.3 x 6.5 T	FA12TE
FA15TE	Hydraulic	30.3 tons	2.6 in.	10,000 psi	3.5-5.4 in.	4.3-9 in.	.5 0-16. in.	6 1.80 in.	3.4-4.9 in.	2.40 in.	41.7 lb
TFA15TEMIN	Hydraulic	30.3 tons	2.6 in.	10,000 psi	3.5-5.4 in.	4.3-9 in.	.5 0-16. in.	6 1.80 in.	3.4-4.9 in.	2.40 in.	41.7 lb	61.7 lb	25.2 x 21.3 x 6.5 T	FA15TE
FA12TI	Hydraulic	27.0 tons	2.6 in.	Integral hydraulic system	5.1-7.0 in.	4.4-9 in.	.5 0-16. in.	6 1.80 in.	3.4-4.9 in.	2.40 in.	48.3 lb
TFA12TISTD	Hydraulic	27.0 tons	2.6 in.	Integral hydraulic system	5.1-7.0 in.	4.4-9 in.	.5 0-16. in.	6 1.80 in.	3.4-4.9 in.	2.40 in.	48.3 lb	68.3 lb	23.0 x 35.4 x 6.3 T	FA12TI
FA15TI	Hydraulic	30.3 tons	2.6 in.	Integral hydraulic system	3.5-5.4 in.	4.4-9 in.	.5 0-16. in.	6 1.80 in.	3.4-4.9 in.	2.40 in.	47.4 lb
TFA15TISTD	Hydraulic	30.3 tons	2.6 in.	Integral hydraulic system	3.5-5.4 in.	4.4-9 in.	.5 0-16. in.	6 1.80 in.	3.4-4.9 in.	2.40 in.	47.4 lb	67.5 lb	23.0 x 35.4 x 6.3 T	FA15TI

ENERPAC BOLTING

Flange Spreading Tools

Wedge, secure-grip and mechanical spreading systems.

ENERPAC

FSC / FSH / FSM Flange Spreading Wedges

6 VARIATIONS

Integral hydraulic, external hydraulic and mechanical wedge spreaders.

COMMON APPLICATIONSSeparating flange joints for gasket, valve, inspection and maintenance work.

COMMON INDUSTRIESOil & gas, petrochemical, pipelines, refineries and power generation.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 6 MODELS & FULL SPECIFICATIONS+

Model	Maximum Spreading Force	Tip Clearance	Maximum Spread with Stepped Blocks	Spreader Type	Oil Capacity	Tool Weight	Maximum Operating Pressure	Type	Spreader	Hand Pump	Purpose	Fits
FSC14	14 tons	0.24 in.	3.16 in.	Integral hydraulics	Self-contained	19.8 lb
FSH14	14 tons	0.24 in.	3.16 in.	External hydraulics	4.76 in³	15.7 lb	10,000 psi
FSM8	8 tons	0.24 in.	3.16 in.	Mechanical		14.3 lb
STF14H								Pump / tool set	FSH14	P392	Complete hydraulic flange-spreading set
SB1								Safety block				FSC14 / FSH14 / FSM8
FSB1								Stepped block set			Increases wedge opening up to 3.16 in.	FSC14 / FSH14 / FSM8

ENERPAC

SWi-Series Flange Spreading Tools

21 VARIATIONS

Standard and ATEX-rated SWi spreading tool/kit variations.

COMMON APPLICATIONSControlled flange separation from very small access gaps.

COMMON INDUSTRIESOil & gas, petrochemical, pipeline, power and industrial shutdowns.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 21 MODELS & FULL SPECIFICATIONS+

Model	Tool Type	Maximum Spreading Force per Tool	Maximum Spreading Distance	Minimum Access Gap (A)	Jaw Width	Tool Weight	Kit Weight	Carry Case Dimensions	Tool Model
SWi5TE-S	External Hydraulic	8.7 tons	4.0 in.	0.16 in.	1.97 1 in.	1.4 lb	19.1 lb	22.8 x 13.4 x 7.1	SWi5TE
SWi5TE	External Hydraulic	8.7 tons	4.0 in.	0.16 in.	1.97 1 in.	1.4 lb
SWi5TE-T	External Hydraulic	8.7 tons	4.0 in.	0.16 in.	1.97 1 in.	1.4 lb	31.7 lb	22.8 x 13.4 x 7.1	SWi5TE
SWi5TI-S	Integral Hydraulic	8.7 tons	4.0 in.	0.16 in.	1.97 1 in.	5.4 lb	23.1 lb	22.8 x 13.4 x 7.1	SWi5TI
SWi5TI	Integral Hydraulic	8.7 tons	4.0 in.	0.16 in.	1.97 1 in.	5.4 lb
SWi1214TMSTDSPB	Mechanical	15.7 tons	4.1 in.	0.24 in.	2.40 1 in.	3.7 lb	28.7 lb	22.8 x 13.0 x 6.5	SWi12/14TM
SWi12/14TM	Mechanical	15.7 tons	4.1 in.	0.24 in.	2.40 1 in.	3.7 lb
SWi2025TEMINSPB	External Hydraulic	27.0 tons	4.1 in.	0.24 in.	2.40 1 in.	4.1 lb	25.6 lb	22.8 x 13.0 x 6.5	SWi20/25TE
SWi20/25TE	External Hydraulic	27.0 tons	4.1 in.	0.24 in.	2.40 1 in.	4.1 lb
SWi2025TESTDSPB	External Hydraulic	27.0 tons	4.1 in.	0.24 in.	2.40 1 in.	4.1 lb	45.6 lb	36.2 x 19.7 x 8.1	SWi20/25TE
SWi2025TEMAXSPB	External Hydraulic	27.0 tons	4.1 in.	0.24 in.	2.40 1 in.	4.1 lb	72.8 lb	36.2 x 19.7 x 8.1	SWi20/25TE
SWi2025TISTDSPB	Integral Hydraulic	27.0 tons	4.1 in.	0.24 in.	2.40 1 in.	8.7 lb	20.4 lb	22.8 x 13.0 x 6.5	SWi20/25TI
SWi20/25TI	Integral Hydraulic	27.0 tons	4.1 in.	0.24 in.	2.40 1 in.	8.7 lb
SWi1214TMSTDEX	Mechanical 1	5.7 tons	4.10 in.	0.24 in.	2.40 in.	13.7 lb	37.5 lb	22.8 x 15.7 x 7.1	SWi12/14TMEX
SWi12/14TMEX	Mechanical 1	5.7 tons	4.10 in.	0.24 in.	2.40 in.	13.7 lb
SWi2025TEMINEX	External Hydraulic 2	7.0 tons	4.10 in.	0.24 in.	2.40 in.	14.1 lb	33.1 lb	22.8 x 15.7 x 7.1	SWi20/25TEEX
SWi20/25TEEX	External Hydraulic 2	7.0 tons	4.10 in.	0.24 in.	2.40 in.	14.1 lb
SWi2025TESTDEX	External Hydraulic 2	7.0 tons	4.10 in.	0.24 in.	2.40 in.	14.1 lb	60.6 lb	26.8 x 22.0 x 7.1	SWi20/25TEEX
SWi2025TEMAXEX	External Hydraulic 2	7.0 tons	4.10 in.	0.24 in.	2.40 in.	14.1 lb	85.5 lb	36.6 x 23.6 x 7.1	SWi20/25TEEX
SWi2025TISTDEX	Integral Hydraulic 2	7.0 tons	4.10 in.	0.24 in.	2.40 in.	18.7 lb	38.6 lb	22.8 x 15.7 x 7.1	SWi20/25TIEX
SWi20/25TIEX	Integral Hydraulic 2	7.0 tons	4.10 in.	0.24 in.	2.40 in.	18.7 lb

ENERPAC

SG-Series Secure-Grip Flange Spreaders

14 VARIATIONS

Tool models plus standard kit variations with force, bolt-hole and flange-fit data.

COMMON APPLICATIONSZero-gap and bolt-hole-mounted flange spreading where conventional wedges cannot be inserted.

COMMON INDUSTRIESRefineries, pipelines, process plants, power generation and heavy maintenance.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 14 MODELS & FULL SPECIFICATIONS+

Model	Tool Type	Maximum Spreading Force per Tool	Maximum Spreading Distance	Bolt-Hole Diameter Range (B)	Tool Overall Dimension (A)	Tool Dimension (B)	Tool Dimension (C)	Tool Dimension (D)	Tool Dimension (E)	Tool Dimension (F)	Tool Weight	Kit Weight	Carry Case Dimensions	Tool Model	Flange Joint Thickness (F) – Minimum	Flange Joint Thickness (F) – Maximum	Valve / Spacer Thickness (V) – Minimum	Valve / Spacer Thickness (V) – Maximum	Maximum Flange Clearance (C)	Minimum Radial Space (R)	Minimum Axial Space for Installation (A1)	Minimum Axial Space Installed (A2)	Minimum Axial Plug Space for Installation (P1)	Minimum Axial Plug Space Installed (P2)
.5SG4TM	Mechanical	4.2 tons	2.95 in.	0.69 - 0.91 in.	15.7 in.	7.5 in.	7.2 in.	3.0 in.	15.2 in.	1.9 in.	9.9 lb
SG4TMSTD	Mechanical	4.2 tons	2.95 in.	0.69 - 0.91 in.	15.7 in.	7.5 in.	7.2 in.	3.0 in.	15.2 in.	1.9 in.	9.9 lb	28.2 lb	20.5x14.8x6	.5SG4TM	2.4 in.	7.3 Ou in.	0* tside in.	1.8* in.	2.0 in.	6.7 in.	6.7 in.	7.9 in.
.5SG6TM	Mechanical	6.7 tons	3.15 in.	0.94 - 1.18 in.	18.4 in.	9.6 in.	9.9 in.	3.1 in.	17.5 in.	2.0 in.	16.5 lb
SG6TMSTD	Mechanical	6.7 tons	3.15 in.	0.94 - 1.18 in.	18.4 in.	9.6 in.	9.9 in.	3.1 in.	17.5 in.	2.0 in.	16.5 lb	35.3 lb	25.2x21.3x6	.5SG6TM	2.4 in.	8.3 fac in.	e of 0* in.	2.0* in.	2.2 in.	9.1 in.	7.9 in.	9.2 in.
.5SG11TM	Mechanical	12.4 tons	3.54 in.	1.18 - 1.54 in.	20.3 in.	9.8 in.	10.4 in.	3.5 in.	18.2 in.	2.4 in.	23.1 lb
SG11TMSTD	Mechanical	12.4 tons	3.54 in.	1.18 - 1.54 in.	20.3 in.	9.8 in.	10.4 in.	3.5 in.	18.2 in.	2.4 in.	23.1 lb	44.1 lb	25.2x21.3x6	.5SG11TM	3.8 in.	9.4 fla Ou in.	nge / 0* tside in.	2.4* in.	2.4 in.	9.4 in.	8.8 in.	10.2 in.
.5SG13TE	Hydraulic	14.6 tons	4.53 in.	1.50 - 1.93 in.	20.3 in.	11.9 in.	12.4 in.	4.5 in.	24.8 in.	2.8 in.	47.4 lb
SG13TESTD	Hydraulic	14.6 tons	4.53 in.	1.50 - 1.93 in.	20.3 in.	11.9 in.	12.4 in.	4.5 in.	24.8 in.	2.8 in.	47.4 lb	89.3 lb	35.0x22.4x6	.5SG13TE	4.7 in.	12.2 fac in.	e of 0* in.	3.7* in.	2.8 in.	11.0 in.	12.2 in.	10.2 in.
.5SG15TE	Hydraulic	16.9 tons	3.94 in.	1.87 - 2.44 in.	23.6 in.	13.6 in.	15.0 in.	3.9 in.	28.3 in.	3.1 in.	57.3 lb
SG15TESTD	Hydraulic	16.9 tons	3.94 in.	1.87 - 2.44 in.	23.6 in.	13.6 in.	15.0 in.	3.9 in.	28.3 in.	3.1 in.	57.3 lb	99.2 lb	35.0x22.4x6	.5SG15TE	5.5 in.	15.7 fla in.	nge 0* in.	3.1* in.	3.1 in.	14.6 in.	15.0 in.	12.4 in.
SG18TE	Hydraulic	20.2 tons	3.93 in.	2.34 - 2.95 in.							31 lb				7.5 in.	17.7 in.				2.2 B in.	24.4 in.	5.4 in.	11.1 in.	11.1 in.
SG18TESTD	Hydraulic	20.2 tons	3.93 in.	2.34 - 2.95 in.							31 lb	99 lb	35 x 22.4 x 6.5	SG18TE	7.5 in.	17.7 in.				2.2 B in.	24.4 in.	5.4 in.	11.1 in.	11.1 in.
SG25TE	Hydraulic	28.1 tons	4.72 in.	2.95 - 4.25 in.							53 lb				8.3 in.	22.4 in.				2.2 in.	29.5 in.	3.3 in.	15.0 in.	15.0 in.
SG25TESTD	Hydraulic	28.1 tons	4.72 in.	2.95 - 4.25 in.							53 lb	110 lb	35 x 22.4 x 6.5	SG25TE	8.3 in.	22.4 in.				2.2 in.	29.5 in.	3.3 in.	15.0 in.	15.0 in.

ENERPAC

MG-Series Mechanical Flange Spreader

2 VARIATIONS

Compact mechanical wedge spreading tool and kit.

COMMON APPLICATIONSMechanical flange spreading where external hydraulic power is not required.

COMMON INDUSTRIESGeneral industrial maintenance, pipelines and process plants.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 2 MODELS & FULL SPECIFICATIONS+

Model	Tool Type	Maximum Spreading Force	Maximum Spreading Distance	Minimum Access Gap (A)	Wedge Width	Tool Weight	Kit Weight	Carry Case Dimensions	Tool Model
MG7TM	Mechanical	7.6 tons	1.06 in.	0.08 in.	1.80 in.	11.0 lb
MG7TMSTD	Mechanical kit	7.6 tons	1.06 in.	0.08 in.	1.80 in.	11.0 lb	12.1 lb	14.2 x 11.8 x 3.5 in.	MG7TM

ENERPAC BOLTING

Valve Change-Out & Flange Closing

Tools for controlled valve removal, spacer/gasket work and flange closure.

ENERPAC

VC-Series Valve Change-Out Tools

12 VARIATIONS

Tool models plus STD/MAX kits and published flange-fit envelope data.

COMMON APPLICATIONSRemoving and installing valves, spacers and gaskets while controlling flange separation.

COMMON INDUSTRIESPipelines, refineries, chemical plants and process facilities.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 12 MODELS & FULL SPECIFICATIONS+

Model	Tool Type	Maximum Spreading Force per Tool	Maximum Spreading Distance	Bolt-Hole Diameter Range (B)	Flange Joint Thickness (F) – Minimum	Flange Joint Thickness (F) – Maximum	Valve / Spacer Thickness (V) – Maximum	Flange Clearance (C)	Radial Space (R)	Axial Space for Installation (A1)	Axial Space Installed (A2)	Two-Tool Kit Weight	Pump Kit Weight	Gross Kit Weight	Tool Carry Case Dimensions	Pump Carry Case Dimensions	Tool Model
VC10/13TE	Hydraulic	11.2 tons	22.8 in.	1.50 - 1.93 in.	4.3 in.	27.2 in.	22.8* in.
VC10/13TESTD	Hydraulic	11.2 tons	22.8 in.	1.50 - 1.93 in.	4.3 in.	27.2 in.	22.8* in.					110 lb	60 lb	170 lb	21.7 x 47.2 x 6.7	21.7 x 47.2 x 6.7	VC10/13TE
VC10/13TEMAX	Hydraulic	11.2 tons	22.8 in.	1.50 - 1.93 in.	4.3 in.	27.2 in.	22.8* in.					110 lb	66 lb	287 lb	21.7 x 47.2 x 6.7	21.7 x 47.2 x 6.7	VC10/13TE
VC10/15TE	Hydraulic	11.2 tons	22.0 in.	1.87 - 2.44 in.	5.1 in.	27.2 in.	22.0* in.	Bolt-hole circle / Largest OD of	Bolt-hole circle / Closest	Outside face of flange /Closest	Inner face of flange / Closest
VC10/15TESTD	Hydraulic	11.2 tons	22.0 in.	1.87 - 2.44 in.	5.1 in.	27.2 in.	22.0* in.					117 lb	60 lb	176 lb	21.7 x 47.2 x 6.7	21.7 x 47.2 x 6.7	VC10/15TE
VC10/15TEMAX	Hydraulic	11.2 tons	22.0 in.	1.87 - 2.44 in.	5.1 in.	27.2 in.	22.0* in.	Bolt-hole circle / Largest OD of	Bolt-hole circle / Closest	Outside face of flange /Closest	Inner face of flange / Closest	117 lb	66 lb	300 lb	21.7 x 47.2 x 6.7	21.7 x 47.2 x 6.7	VC10/15TE
VC10/18TE	Hydraulic	11.2 tons	20.2 in.	2.34 - 2.95 in.	6.9 in.	27.2 in.	20.2* in.	max. 5.1 inches	min. 14.2 inches	min. 11.8 inches	min. 14.6 inches
VC10/18TESTD	Hydraulic	11.2 tons	20.2 in.	2.34 - 2.95 in.	6.9 in.	27.2 in.	20.2* in.	valve/spacer -	obstruction -	obstruction -	obstruction -	128 lb	60 lb	187 lb	21.7 x 47.2 x 6.7	21.7 x 47.2 x 6.7	VC10/18TE
VC10/18TEMAX	Hydraulic	11.2 tons	20.2 in.	2.34 - 2.95 in.	6.9 in.	27.2 in.	20.2* in.	max. 5.1 inches	min. 14.2 inches	min. 11.8 inches	min. 14.6 inches	128 lb	66 lb	322 lb	21.7 x 47.2 x 6.7	21.7 x 47.2 x 6.7	VC10/18TE
VC10/25TE	Hydraulic	11.2 tons	19.3 in.	2.95 - 4.25 in.	7.9 in.	27.2 in.	19.3* in.
VC10/25TESTD	Hydraulic	11.2 tons	19.3 in.	2.95 - 4.25 in.	7.9 in.	27.2 in.	19.3* in.					128 lb	60 lb	187 lb	21.7 x 47.2 x 6.7	21.7 x 47.2 x 6.7	VC10/25TE
VC10/25TEMAX	Hydraulic	11.2 tons	19.3 in.	2.95 - 4.25 in.	7.9 in.	27.2 in.	19.3* in.					128 lb	66 lb	322 lb	21.7 x 47.2 x 6.7	21.7 x 47.2 x 6.7	VC10/25TE

ENERPAC

FC-Series Flange Closing Tools

3 VARIATIONS

Hydraulic flange closing tool and kit variations.

COMMON APPLICATIONSControlled pulling/closing of flange joints while maintaining an even gap.

COMMON INDUSTRIESPipelines, refineries, petrochemical and process construction.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 3 MODELS & FULL SPECIFICATIONS+

Model	Tool Type	Maximum Closing Force per Tool	Maximum Closing Distance	Minimum Bolt-Hole Diameter	Tool Weight	Working Span / Flange Dimension (A)	Minimum Flange Dimension (B)	Minimum Flange Dimension (C)	Kit Weight	Carry Case Dimensions	Tool Model
FC10TE	Hydraulic flange closing tool	11.2 tons	22.4 in.	1.0 in.	24.3 lb
FC10TESTD	Hydraulic kit	11.2 tons	22.4 in.		24.3 lb	0.63 - 22.4	1.0 in.	1.30 in.	51.8 lb	35.0 x 22.4 x 6.5 F	FC10TE
FC10TEMAX	Hydraulic kit	11.2 tons	22.4 in.		24.3 lb	0.63 - 22.4	1.0 in.	1.30 in.	80.5 lb	35.0 x 22.4 x 6.5 F	FC10TE

ENERPAC BOLTING

Hydraulic Nut Splitters

Single-blade, double-blade, integral-pump and larger modular nut splitting systems.

ENERPAC

NC-Series Hydraulic Nut Splitters

16 VARIATIONS

Standard, dual-blade and complete pump/tool set variations.

COMMON APPLICATIONSRemoving frozen or corroded nuts without torches, hammers or damage to surrounding joint components.

COMMON INDUSTRIESPlant maintenance, pipelines, refineries, mining and heavy equipment.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 16 MODELS & FULL SPECIFICATIONS+

Model	Bolt Range	Hexagon Nut Range (Across Flats)	Maximum Cutting Force	Oil Capacity	Overall Length (A)	Body Length (B)	Head Height / Width (C)	Body / Cylinder Dimension (D)	Jaw / Chisel Reach (F)	Base / Head Width (H)	Head Outside Diameter / Width (J)	Tool Weight	Maximum Operating Pressure	Type	Nut Splitter	Hand Pump	Includes
NC1019	5•16 - ½ in.	0.50 - 0.75 in.	5 tons	0.92 in³	1.57 in.	6.69 in.	0.27 in.	0.75 in.	1.10 in.	1.89 in.	0.83 in.	1.8 lb	10,000 psi
NC1924	½ - ⅝ in.	0.75 - 0.94 in.	10 tons	1.22 in³	2.13 in.	7.52 in.	0.32 in.	1.02 in.	1.57 in.	2.44 in.	0.98 in.	4.4 lb	10,000 psi
NC2432	⅝ - ⅞ in.	0.94 - 1.13 in.	15 tons	3.66 in³	2.52 in.	8.74 in.	0.39 in.	1.22 in.	2.01 in.	2.83 in.	1.30 in.	6.6 lb	10,000 psi
NC3241	⅞ - 1⅛ in.	1.13 - 1.56 in.	20 tons	4.88 in³	2.95 in.	9.61 in.	0.67 in.	1.42 in.	2.60 in.	3.46 in.	1.69 in.	9.7 lb	10,000 psi
NC4150	1⅛ - 1⅜ in.	1.56 - 2.00 in.	35 tons	9.46 in³	3.70 in.	11.34 in.	0.83 in.	1.77 in.	2.91 in.	4.13 in.	2.13 in.	18.0 lb	10,000 psi
NC5060	1⅜ - 1½ in.	2.00 - 2.25 in.	50 tons	14.64 in³	4.17 in.	12.52 in.	0.91 in.	2.13 in.	3.54 in.	5.04 in.	2.36 in.	26.0 lb	10,000 psi
NC6075	1½ - 1⅞ in.	2.38 - 2.88 in.	90 tons	30.00 in³	6.14 in.	15.47 in.	1.02 in.	2.83 in.	4.33 in.	7.13 in.	3.15 in.	75.1 lb	10,000 psi
NC1924D	½ - ⅝ in.	0.75 - 0.94 in.	10 tons	1.22 in³	2.13 in.	6.61 in.	0.87 in.	0.89 in.	1.97 in.	2.60 in.	1.02 in.	8.4 lb	10,000 psi
NC2432D	⅝ - ⅞ in.	0.94 - 1.13 in.	15 tons	3.66 in³	2.52 in.	10.83 in.	0.89 in.	1.22 in.	2.56 in.	3.07 in.	1.30 in.	11.9 lb	10,000 psi
NC3241D	⅞ - 1⅛ in.	1.13 - 1.56 in.	20 tons	4.88 in³	3.03 in.	12.00 in.	1.22 in.	1.46 in.	3.15 in.	3.54 in.	1.69 in.	15.9 lb	10,000 psi
NC4150D	1⅛ - 1⅜ in.	1.56 - 2.00 in.	35 tons	9.46 in³	3.70 in.	13.54 in.	1.54 in.	1.77 in.	3.66 in.	4.37 in.	2.05 in.	30.4 lb	10,000 psi
NC5060D	1⅜ - 1½ in.	2.00 - 2.25 in.	50 tons	14.64 in³	4.17 in.	15.20 in.	1.69 in.	2.13 in.	4.21 in.	5.16 in.	2.44 in.	41.0 lb	10,000 psi
NC6075D	1½ - 1⅞ in.	2.38 - 2.88 in.	90 tons	30.00 in³	6.14 in.	18.74 in.	2.13 in.	2.95 in.	5.24 in.	7.32 in.	3.03 in.	94.6 lb	10,000 psi
STN1924H														Nut splitter pump-tool set	NC1924	P392	Pump, tool, gauge, gauge adaptor, couplers and hose
STN2432H														Nut splitter pump-tool set	NC2432	P392	Pump, tool, gauge, gauge adaptor, couplers and hose
STN3241H														Nut splitter pump-tool set	NC3241	P392	Pump, tool, gauge, gauge adaptor, couplers and hose

ENERPAC

NSC / NSH Compact Nut Splitters

7 VARIATIONS

Compact integral-pump and hydraulic models.

COMMON APPLICATIONSPipeline-flange nut removal, including integral-pump, subsea and work-at-height applications.

COMMON INDUSTRIESOil & gas, subsea, pipelines, petrochemical and industrial maintenance.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 7 MODELS & FULL SPECIFICATIONS+

Model	Hexagon Nut Range (Across Flats)	Bolt Range	Maximum Cutting Force	Oil Capacity	Nut Splitter Type	Cutting Tip Service Kit	Overall Length (A)	Body Length (B)	Head Width / Diameter (C)	Overall Head Depth (D)	Maximum Head Height (H)	Minimum Nut-Side Clearance (N)	Maximum Opposite-Side Clearance (S)	Minimum Tip / Bolt Clearance (T)	Tool Width (W)	Tool Weight	Maximum Operating Pressure
NSC1927	½ - ⅝ 0 in.	.75 - 1.0 in.	6 12 tons	Integral pump	Integral pump	13.9	– in.	6.0 in.	3.2 in.	0.71 in.	0.45 in.	0.96 in.	1.04 in.	2.11 in.	12.8 in.	NSH1927CTK lb	Integral hydraulic hand pump
NSC2432	¾ - ⅞ 0 in.	.94 - 1.2 in.	6 15 tons	Integral pump		14.6	– in.	6.0 in.	3.2 in.	0.98 in.	0.35 in.	1.04 in.	1.26 in.	2.26 in.	13.9 in.	NSH2432CTK lb	Integral hydraulic hand pump
NSH1927	½ - ⅝ 0 in.	.75 - 1.0 in.	6 12 tons	2.8 in³	Hydraulic	10.1	8.4 in.	6.0 in.	3.2 in.	0.71 in.	0.45 in.	0.96 in.	1.04 in.	2.11 in.	7.7 in.	NSH1927CTK lb	10,000 psi
NSH2432	¾ - ⅞ 0 in.	.94 - 1.2 in.	6 15 tons	2.8 in³		10.4	8.7 in.	6.0 in.	3.2 in.	0.98 in.	0.35 in.	1.04 in.	1.26 in.	2.26 in.	8.8 in.	NSH2432CTK lb	10,000 psi
NSH3646	⅞ - 1⅛ 1 in.	.42 - 1.8 in.	1 20 tons	4.9 in³		11.4	9.4 in.	6.7 in.	3.7 in.	1.34 in.	0.63 in.	1.53 in.	1.73 in.	3.20 in.	15.2 in.	NSH3646CTK lb	10,000 psi
NSH5065	1¼ - 1⅝ 2 in.	.00 - 2.5 in.	6 36 tons	14.0 in³		14.8	12.7 in.	8.3 in.	7.3 in.	1.77 in.	0.90 in.	1.93 in.	2.05 in.	4.25 in.	24.0 in.	NSH5065CTK lb	10,000 psi
NSH6575	1⅝ - 1⅞ 2 in.	.56 - 2.9 in.	5 50 tons	20.0 in³		15.6	13.6 in.	8.7 in.	7.9 in.	2.15 in.	1.06 in.	2.40 in.	2.56 in.	5.31 in.	54.0 in.	NSH6575CTK lb	10,000 psi

ENERPAC

NSH Large Nut Splitters & Power Heads

10 VARIATIONS

Large cutting heads plus single- and double-acting NSPH power heads.

COMMON APPLICATIONSLarge corroded nut removal on standard BS/ANSI flanges using single- or double-acting power heads.

COMMON INDUSTRIESOil & gas, petrochemical, pipelines, power generation and heavy industry.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 10 MODELS & FULL SPECIFICATIONS+

Model	Bolt Range	Hexagon Nut Range (Across Flats)	Maximum Cutting Force	Compatible Single-Acting Power Head	Compatible Double-Acting Power Head	Cutting Head Weight	Maximum Operating Pressure	Type	Fits Cutting Heads
NSH31	1-3/4–2 in.	2-3/4–3-1/8 in.	33.5 tons	NSPH3	NSPH3D	44.1 lb	10,000 psi
NSH32	1-3/4–2-1/4 in.	2-3/4–3-1/2 in.	33.5 tons	NSPH3	NSPH3D	46.3 lb	10,000 psi
NSH33	1-3/4–2-1/2 in.	2-3/4–3-7/8 in.	33.5 tons	NSPH3	NSPH3D	48.5 lb	10,000 psi
NSH34	1-3/4–2-3/4 in.	2-3/4–4-1/4 in.	33.5 tons	NSPH3	NSPH3D	48.5 lb	10,000 psi
NSH41	2-3/4–3 in.	4-1/4–4-5/8 in.	67.0 tons	NSPH4	NSPH4D	69.9 lb	10,000 psi
NSH42	2-3/4–3-1/2 in.	4-1/4–5-3/8 in.	67.0 tons	NSPH4	NSPH4D	95.9 lb	10,000 psi
NSPH3							10,000 psi	Single-acting spring-return power head	NSH31 / NSH32 / NSH33 / NSH34
NSPH4							10,000 psi	Single-acting spring-return power head	NSH41 / NSH42
NSPH3D							10,000 psi	Double-acting power head	NSH31 / NSH32 / NSH33 / NSH34
NSPH4D							10,000 psi	Double-acting power head	NSH41 / NSH42

ENERPAC BOLTING

Flange Face Maintenance

Manual portable flange refacing.

ENERPAC

FF120 QuickFace

1 VARIATIONS

Hand-operated flange facing machine for 1–12 in. flange OD facing range.

COMMON APPLICATIONSPortable flange refacing where damaged flat or raised sealing surfaces need restoration.

COMMON INDUSTRIESProcess piping, refineries, petrochemical, power generation and field maintenance.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 1 MODELS & FULL SPECIFICATIONS+

Model	Tool Type	Pipe / Mandrel ID Mounting Range	Flange Outside Diameter Facing Range	Cutting Depth Adjustment	Tool Weight	Weight in Storage Box	Power Source
FF120	Hand-operated flange facing machine	1–6 in. / 25.4–152.4 mm	1–12 in. / 25.4–304.8 mm	0.005 in. / 0.127 mm per indicator mark	15 lb	33 lb	Manual

ENERPAC BOLTING

Sealed Hydraulic Hand Pumps

Sealed hand pumps used with flange maintenance systems.

ENERPAC

HP-Series Sealed Hand Pumps

24 VARIATIONS

All HP sealed pump tools plus standard and ATEX kit variations with oil capacity, displacement, handle effort, stroke, length and weights.

COMMON APPLICATIONSSealed hydraulic power for flange tools, including ATEX-compatible tool packages.

COMMON INDUSTRIESOil & gas, petrochemical, refineries and hazardous-area maintenance.

QUICK MODEL SELECTOR

Select a model aboveSelect a model to see its specifications.

VIEW ALL 24 MODELS & FULL SPECIFICATIONS+

Model	Pump Type	Nominal Oil Capacity	Usable Oil Capacity	First-Stage Oil per Stroke	Second-Stage Oil per Stroke	Maximum Handle Effort	Piston Stroke	Overall Pump Length	Pump Weight	Maximum Operating Pressure	Kit Type	Carry Case Dimensions	Kit Weight	Tool Model
HP350S	SA, SP	21.4 in³	18.3 in³	0.221 in³	0.047 in³	73 ft-lb	0.71 in.	21.8 in.	9.7 lb	10,000 psi
HP350SMIN	SA, SP	21.4 in³	18.3 in³	0.221 in³	0.047 in³	73 ft-lb	0.71 in.	21.8 in.	9.7 lb	10,000 psi	Standard	9.8 x 7.1 x 23.6	10.8 lb	HP350S
HP350SMINEX	SA, SP	21.4 in³	18.3 in³	0.221 in³	0.047 in³	73 ft-lb	0.71 in.	21.8 in.	9.7 lb	10,000 psi	ATEX	9.8 x 7.1 x 23.6	10.8 lb	HP350S
HP550S	SA, SP	35.4 in³	33.6 in³	0.221 in³	0.047 in³	55 ft-lb	0.71 in.	25.3 in.	11.2 lb	10,000 psi
HP550SMIN	SA, SP	35.4 in³	33.6 in³	0.221 in³	0.047 in³	55 ft-lb	0.71 in.	25.3 in.	11.2 lb	10,000 psi	Standard	9.8 x 7.1 x 27.6	13.0 lb	HP550S
HP550SMINEX	SA, SP	35.4 in³	33.6 in³	0.221 in³	0.047 in³	55 ft-lb	0.71 in.	25.3 in.	11.2 lb	10,000 psi	ATEX	9.8 x 7.1 x 27.6	13.0 lb	HP550S
HP1000S	SA, SP	67.7 in³	61.0 in³	0.221 in³	0.047 in³	46 ft-lb	0.71 in.	34.1 in.	13.4 lb	10,000 psi
HP1000SMIN	SA, SP	67.7 in³	61.0 in³	0.221 in³	0.047 in³	46 ft-lb	0.71 in.	34.1 in.	13.4 lb	10,000 psi	Standard	9.8 x 7.1 x 35.4	15.7 lb	HP1000S
HP1000SMINEX	SA, SP	67.7 in³	61.0 in³	0.221 in³	0.047 in³	46 ft-lb	0.71 in.	34.1 in.	13.4 lb	10,000 psi	ATEX	9.8 x 7.1 x 35.4	15.7 lb	HP1000S
HP350D	SA, TP	21.4 in³	18.3 in³	0.221 in³	0.047 in³	73 ft-lb	0.71 in.	22.8 in.	14.3 lb	10,000 psi
HP350DMIN	SA, TP	21.4 in³	18.3 in³	0.221 in³	0.047 in³	73 ft-lb	0.71 in.	22.8 in.	14.3 lb	10,000 psi	Standard	9.8 x 7.1 x 23.6	15.9 lb	HP350D
HP350DMINEX	SA, TP	21.4 in³	18.3 in³	0.221 in³	0.047 in³	73 ft-lb	0.71 in.	22.8 in.	14.3 lb	10,000 psi	ATEX	9.8 x 7.1 x 23.6	15.9 lb	HP350D
HP550D	SA, TP	35.4 in³	33.6 in³	0.221 in³	0.047 in³	55 ft-lb	0.71 in.	26.3 in.	15.9 lb	10,000 psi
HP550DMIN	SA, TP	35.4 in³	33.6 in³	0.221 in³	0.047 in³	55 ft-lb	0.71 in.	26.3 in.	15.9 lb	10,000 psi	Standard	9.8 x 7.1 x 27.6	17.9 lb	HP550D
HP550DMINEX	SA, TP	35.4 in³	33.6 in³	0.221 in³	0.047 in³	55 ft-lb	0.71 in.	26.3 in.	15.9 lb	10,000 psi	ATEX	9.8 x 7.1 x 27.6	17.9 lb	HP550D
HP1000D	SA, TP	67.7 in³	61.0 in³	0.221 in³	0.047 in³	46 ft-lb	0.71 in.	35.2 in.	15.7 lb	10,000 psi
HP1000DMIN	SA, TP	67.7 in³	61.0 in³	0.221 in³	0.047 in³	46 ft-lb	0.71 in.	35.2 in.	15.7 lb	10,000 psi	Standard	9.8 x 7.1 x 35.4	20.5 lb	HP1000D
HP1000DMINEX	SA, TP	67.7 in³	61.0 in³	0.221 in³	0.047 in³	46 ft-lb	0.71 in.	35.2 in.	15.7 lb	10,000 psi	ATEX	9.8 x 7.1 x 35.4	20.5 lb	HP1000D
HP350SD	DA	21.4 in³	18.3 in³	0.221 in³	0.047 in³	73 ft-lb	0.71 in.	18.0 in.	11.7 lb	10,000 psi
HP350SDMIN	DA	21.4 in³	18.3 in³	0.221 in³	0.047 in³	73 ft-lb	0.71 in.	18.0 in.	11.7 lb	10,000 psi	Standard	9.8 x 7.1 x 23.6	12.5 lb	HP350SD
HP550SD	DA	35.4 in³	33.6 in³	0.221 in³	0.047 in³	55 ft-lb	0.71 in.	22.8 in.	12.6 lb	10,000 psi
HP550SDMIN	DA	35.4 in³	33.6 in³	0.221 in³	0.047 in³	55 ft-lb	0.71 in.	22.8 in.	12.6 lb	10,000 psi	Standard	9.8 x 7.1 x 27.6	13.2 lb	HP550SD
HP1000SD	DA	67.7 in³	61.0 in³	0.221 in³	0.047 in³	46 ft-lb	0.71 in.	30.3 in.	13.0 lb	10,000 psi
HP1000SDMIN	DA	67.7 in³	61.0 in³	0.221 in³	0.047 in³	46 ft-lb	0.71 in.	30.3 in.	13.0 lb	10,000 psi	Standard	9.8 x 7.1 x 35.4	13.9 lb	HP1000SD

NORTHLAND AIR HYDRAULICS • EDMONTON

Enerpac Flange Tools in Edmonton

Northland can help select a flange tool from photos and measurements. Useful dimensions include flange face gap, flange thickness, bolt-hole diameter, radial clearance, valve or spacer thickness and required movement.